View Full Version : 1.3 sr engine
what bhp would a 1.3 sr Nova engine have with a polished & Ported head and a vernier pulley and cam. thanks :)
Southie
03-02-09, 05:18 PM
I would say about 80ish depending on what cam your using. The engine will have been only 72 as standard anyway.
Also depends if your running anything else with it.
and the condition of the engine aswell....
i would say around 85bhp but again all depends on what cam and how much head work has been done.
give up and sell me the carb lol
GRUNT 16V
03-02-09, 07:27 PM
My 1.4 Nv Engine Kicked 105 Bhp With A Stage 2 Head A 270 Deg Cam ,4 Branch And A 32/34 Weber
brainsnova
03-02-09, 07:30 PM
my 1.3sr was quicker than a 205gti 1.6 and that was k+n and backbox lol
would a 1.3 sr engine match everything in a 1.2l car like gearbox/ engine mounts/ coil and wire up the same as the 1.2l
nova_saloon
03-02-09, 08:55 PM
whack on some webers and a cam and your looking at going faster then a gte gsi if your engine is in good nick
would a 1.3 sr engine match everything in a 1.2l car like gearbox/ engine mounts/ coil and wire up the same as the 1.2l
apart from the 1.3 having a different carb/manifold & a 4-2-1 exhaust, not a 4-1 like on the 1.2, the engines are externally identical
As above.
1.3's have a different throttle cable, everything else is the same. 1.3's would have come with a 5speed box though (F10 or F13?) And you would get away with the exhaust, i ran a 1.4 with a 1.2 4-1 exhaust.
If you change the exhaust you will need the centre seciton too.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.