PDA

View Full Version : wiring c14se



nova_stee
18-01-09, 06:33 PM
thanks for looking could any one help me with a couple of problems.
i have fitted a c14se out of a corsa sri in to my 1.2 could any one tell me the colour of the wire for the ecu light on the 1.4 loom and the colour for the same light on my digi dash.
secondly the car some times cuts out at junctions and the code reader says vehiche speed signal.
so i no that to solve this i run a wire from the thin red and blue on the 1.4 loom to the red and blue on the sender on the box what i want to no is can i use the digi sender or do i need to use a 1.2i sender and put the digi one on top were the cable goes on the 1.2i sender.
bit confussing but help greatfull.
thanks stee

Rich
18-01-09, 08:52 PM
I used the 1.4 sender with my digi dash, but sure you can just use the digi dash one as long as it gets a reading it will be ok

nova_stee
18-01-09, 09:26 PM
thanks a just wont to get it running rightish so a can have a little play before the let goes in