djbrowney
11-01-09, 02:08 PM
The enigne was rebuilt just over 1000 miles ago, All genuine parts were brought from auto vaux along with arp rod bolts from chris ashley motorsport.
Located in kings lynn, norfolk collection in person
Its a late type dis engine with an early type fly wheel, All componets on the engine have been powdercoated but are purley assetic, The engine is still in the car and can be hurd running, but cant be driven as its slightly
broke :pmsl:
Rebuild was as followed
Crank main and big end bearing (mahla)
Main bolts (gm)
Rod bolts (arp)
Bonded sump gasket (Gm)
Piston rings (mahla)
Valve stem seals (gm)
Valves re ground
Head gasket (elring)
Head bolts (gm)
water pump (oe)
Cambelt kit (Gates)
thermostat (gm) (cool running)
All new gasket, inlet/exhaust/throttle body/ect (elring)
All new bolts, water pump/oil pump/carnk breather/ect
Drive shaft oil seals
Brand new clutch kit (valeo)
Also comes with
alloy intake
alloy bottom pulley
power cap
induction kit
f20 gearbox ( the one on the car whines but i have another good one)
loom
ecu
oil cooler
alt, starter an such like
no doubt i have missed a phew bits, the rebuild parts cost me just short of £500, power cap £65, bottom pulley £50 so its a fookin bargin if you ask me :thumb:
leads not included with the engine as there fenny !!!
£550
http://i69.photobucket.com/albums/i70/djbrowney/048-2.jpg
http://i69.photobucket.com/albums/i70/djbrowney/048-2.jpg
Located in kings lynn, norfolk collection in person
Its a late type dis engine with an early type fly wheel, All componets on the engine have been powdercoated but are purley assetic, The engine is still in the car and can be hurd running, but cant be driven as its slightly
broke :pmsl:
Rebuild was as followed
Crank main and big end bearing (mahla)
Main bolts (gm)
Rod bolts (arp)
Bonded sump gasket (Gm)
Piston rings (mahla)
Valve stem seals (gm)
Valves re ground
Head gasket (elring)
Head bolts (gm)
water pump (oe)
Cambelt kit (Gates)
thermostat (gm) (cool running)
All new gasket, inlet/exhaust/throttle body/ect (elring)
All new bolts, water pump/oil pump/carnk breather/ect
Drive shaft oil seals
Brand new clutch kit (valeo)
Also comes with
alloy intake
alloy bottom pulley
power cap
induction kit
f20 gearbox ( the one on the car whines but i have another good one)
loom
ecu
oil cooler
alt, starter an such like
no doubt i have missed a phew bits, the rebuild parts cost me just short of £500, power cap £65, bottom pulley £50 so its a fookin bargin if you ask me :thumb:
leads not included with the engine as there fenny !!!
£550
http://i69.photobucket.com/albums/i70/djbrowney/048-2.jpg
http://i69.photobucket.com/albums/i70/djbrowney/048-2.jpg