flexi exhaust - MOT?

[Jeff16v]

Will a flexi exhaust lenght pass an MOT, i need to a join 3" cossie backbox to 2" nova on my LET and i'm gonna have to get a reducer and flexi.

pic -

http://i233.photobucket.com/albums/ee77/gsijeff/joint1.jpg

http://i233.photobucket.com/albums/ee77/gsijeff/pics1.jpg

[General Baxter]

aslong as its all mounted up correct, i dont see a problem :)

my TD had one as std in the downpipe, it about about 3" long

[Adam]

Be fine as long as it doesnt blow

[7ova]

Be fine as long as it doesnt blow

adam is correct but allso depends on what mood the tester is in?
be a pass and advise :)

[Rich]

As long as theres no blows i doubt they will say anything about unless they are in a really bad mood..

[Jack]

Why shouldn't it? My Celica has a flexi section as standard...

[G8WCC]

if its not blowing and clearences are ok (fuel/brake pipes ect) they cant fail it.

[mowgli]

as above.

where areyou planning to get the stuff from?? you could try a hgv spares place like David Huggets. trucks & vans often use flexi pipes & you can get standard pipe lengths off the shelf.

[Jeff16v]

Thanks for the info, i got it in my head that flexi's were MOT failures.

I've got to get a 3 to 2 inch reducer, then a 2 inch flexi. I've seen a few on egay but i'm not sure how good they are.