wiring loom

[Dirtydog1]

hi i need the part of wiring that plugs into the dizzy, coil and module on an sr nova (orange type cap) :D

[bainesy69]

u will struggle finding that part pal, ive been trying for weeks.

[bainesy69]

i had to wire my own up pal.i had to get some small female spade connectors, which i got from maplin.i read the wiring diagram and somone also told me on here which wire goes to were.i will try and find the post for you

[bainesy69]

pin 5 on the ignition modual is black/yellow and goes to + on the dizzy
pin 6 on the ignition modual is blue/green and goes to - on the dizzy

dont ask me which is the + and - and the haynes doesnt say

the black wire ( positive) on the coil also goes to pin 4 on the ignition modual
the green wire on the coil does to your rev counter and pin 1 of the ignition modual
pin 2 is brown wire and the earth

pin 3!!! not at all sure. from the picture i would say its connected to the shielding of the wires for the dizzy. so leave that disconnected and try it


This is what i got told on here pal and it worked.i just connected pin 3 to earth and it worked

[Dirtydog1]

ok sweet, ive got alot of ppl on the case looking, if not il have a bash at wiring it myself! cheers for your help chap!