Ideas

[Matt Finary]

I'm after some more idea's for the outside of the flying machine!

So far - smoothed out body
Smoothed scuttle panel with small vent
Washer jets removed
Rain gutters gone
Widen arches made by me :)
butterfly doors :roll:
Bad boy bonnet
flushed tail gate
New front light(Mondeo)
LED's as the rear lights
Spilt rear screen
Bomex front bumper
D and M rear bumper
Custom skirts
Opening rear quarter lights
Fuel filler removed
Delocked
Debadged
New handles
Bomex style mirrors
Pulsar Bonnet vent
Custom Spoiler
Vents blended in to the rear quarter
Vents in the wings
Single wiper.

Any idea's :?:

Thanks

Matt :)

[carltoncrazy]

how about a clear bit in ya bonnet,like that ugly calibra in total vaux

[Fester]

shortened door handles

drill 2 holes through them first lengthways then cut in half then cut some more off the 2 halves

pull some sort of dowel or rod through the holes (they will be perfectly aligned :)) and smooth the ridge between the 2

you could do this by filing round the edges of the 2 halves that meet first and then skim some filler into the ridge or something

then cut the door skin recess bit out of a rotten door and graft it on to yours so the shorter handles look factory fit

you would have to mess with the bars behind the handle to get it to pull properly

maybe then you could have NOVA or something cut out of them in soft, 3D style

just a thought...

[Chris LR]

Twin jet engines on the rear bumber to give that extra power up hills.

[carltoncrazy]

can u do like a solid glass side,
like the scooby.
so no door pillers,like a conv has

[Matt Finary]

Thanks fester but the handles look sweet all ready :P

Matt :D

[ade]

fcuk m8 u cant do any more!

rear qtr windows - make em open like on the ford ka (get the kits from spain) - thats unless you intend having no rear seats in which case pointless

wheres the ariel going or you building that into the shell?

if the roof aint being butchered in the gull wing conversion wot about something with a sun roof - big tinted panel.

Ade

[Norris]

That sounds fairly impressive i have to say, i couldnt imagine you could do much more with it!

Hows it going now, how far have you got?
And where does all the cash come from?! :?

[djp_y2k]

if you have no use for the boot. weld it shut and smooth it off. One lad near me did it to an astra. Looked real cool.

Get a paint job like the clio on the cover of revs.

It may not be to every ones tastes, but I love it. Stands out a mile.

[Matt Finary]

ade they the rear quarters already open, I did them myself and they cost ?0 :D.
I did think about fitting a full length sunroof or a roof vent. The roof hasn't been butchered too much because the doors hinge on the A piller not the roof.
Dan I did think of flushing the tailgate in to the body.
As for the ariel :?:

Matt :)

[djp_y2k]

You dont need an ariel.

Just mount it in your front wing. That way it is hidden and should still work.

[?Marty?]

What colour/s are you thinking of getting it lashed in?

[Matt Finary]

I did think about cossie imp blue, white/green/pink flip and black/silver flip but I'm going for blue/green flip.

Matt :)

[Anton]

side exit exhausts :P

[Matt Finary]

Dual 5inch rear exit exhausts :D

Matt :D

[Ric 16v]

please tell me the pulsar vent is the real thing coz it will look dead tacky if it's a copy (no offence)

[Matt Finary]

It's the same as Ian's

Matt :P

[?Marty?]

Modify the vent. Cut the slats out, and smooth the whole thing off.

[Matt Finary]

I have been thinking of fitting a roof vent, I might get another puslar vent and cut the slats out and smooth it in to the roof :o

Matt :twisted:

[?Marty?]

I like roof vents, I'd have them on mine, but the fucker has a sun-roof :evil: .

Anyway.....Cut it in half aswell (lengthways), remove a section and 're-fit' together. then make another one. And have two of the things (on the roof, i mean).
Look best if they followed the contour of the roof/windscreen seal, and came down over the edge, to the edge of the windscreen.
(Fit a film projector inside them, and then you can project porn onto walls at cruises!?)

And 'shark fins' on the bonnet. :D

Instead of the vents in the wings (or even in the rear quarters), get a single, recessed vent (in the wing anyway), and fit a/some chrome blocking bar/s (like nike swishes) over them.

And don't use mesh for the bumper (and etc). Either use chrome/polished alloy bars or get a piece of aluminium sheeting, and drill large holes into it.

[Matt Finary]

I now getting a roof vent, any more ideas?

Matt :)