Photoshop Pretty Please

[poultergeist]

Hi all, I know its not a Nova but you lot are the photoshop guru's so thought you could help?
Apologies for the 5h1t pictures but they are all I could find,could you put the different wheels on my Primera please,and enlarge them slightly as they are going to be 18's rather than 17's.

Ta Muchly :)

http://i256.photobucket.com/albums/hh166/poultergeist7/DSC00053.jpg

http://i256.photobucket.com/albums/hh166/poultergeist7/DSC00588-1.jpg



http://i256.photobucket.com/albums/hh166/poultergeist7/2775b_m.jpg

http://i256.photobucket.com/albums/hh166/poultergeist7/TswKyalami-1.jpg

http://i256.photobucket.com/albums/hh166/poultergeist7/RS5_WM_500x500.jpg
http://i256.photobucket.com/albums/hh166/poultergeist7/Reizen2_WM_800x800.jpg
http://i256.photobucket.com/albums/hh166/poultergeist7/24cc5904fdb03c5573e61729aa9a4314.jpg
http://i256.photobucket.com/albums/hh166/poultergeist7/LIGHTS2WHITE_F.jpg
http://i256.photobucket.com/albums/hh166/poultergeist7/sm_LIGHTS2WHITE_S.jpg

[L14MNP]

You fail at wheels! Leave the Rotas on, they look like Stevie's old ones from NPOC? Also those pics look familiar, Pistonheads? lol
Mine has 18" RL7's on. Kiss goodbye to any turning circle lol
http://i154.photobucket.com/albums/s247/eurojdmp11/Primera/DSC00082.jpg?t=1231004984
http://i154.photobucket.com/albums/s247/eurojdmp11/Primera/-ve.jpg?t=1231003234
A nice set of 16's and sorted handling would be my choice now like dude :)

[poultergeist]

it has sorted handling,just like bigger wheels,18's look so good!!
nice to see I'm not the only one on here with a P11 :)
yeah,put it on ph because I could really do with something a bit more sensible,or a van,but am in no rush to sell it because as you must know,they are great cars!

[L14MNP]

Yeah they're spot on cars, especially for the money these days. GT's for buttons lol. Can't argue with the fact 18's look good, just not keen on your choices IMO. I don't even want mine anymore lol. Been SORN for over 4 years and in a thousand pieces! Don't even bother with NPOC now lol haven't for years. Add me on MSN if you want to talk P11's anytime dude lol
Yours is a smart one, can't beat a white 4dr. :)

[poultergeist]

cheers mate,how do I add on msn?
Whats wrong with my choices,I think the RS5's will look the nuts? photoshop it for me and we'll see ;)
whats up with yours?

[L14MNP]

lol I'll add you* Don't like them at all dude. I'm fussy with rims lol Too much going on with them IMO.

ah what's up with mine, where to begin... lmao

* done

[poultergeist]

anyone fancy shopping them for me then?

[poultergeist]

noone wanna help :(

[The Simps]

Can't help you with the photoshop but I'm liking the motor! How much you asking for it?

My old man works for nissan and he had several GTs and SRis as demo's and it was always my job to break in te engines :D

I've always wanted to build a track version of one of those as they handle ace for a big fwd car!

From your wheel choice I'd say these...

http://i256.photobucket.com/albums/hh166/poultergeist7/TswKyalami-1.jpg


I've still got a set of technomagnesia detroit F1s I used to run on my old P12. They're 7x18" so clearance was fine. Sold it before I had a chance to lower it but did get someone to photshop for me...

http://img.photobucket.com/albums/v310/TheSimps/NewRims-1.jpg
http://img.photobucket.com/albums/v310/TheSimps/p2150001olly1.jpg

[sulphur]

Better side on pic of the car would be handy. I'm not great with PS but i'll have a go. lol

[L14MNP]

Simps that's a p11-144. Get with the program lol

I'm pleased it is too, because P12's are French POS!
A track P11 was my plan too but I bottled it years ago depsite amassing a few ex works parts :( Do it dude :thumb:

[The Simps]

:ashamed:

its been a while since I've worked with Nissans!

Image a P11 with a SR20DET rwd conversion - yum yum!

[poultergeist]

Make an offer Simps :)

[The Simps]

£500.

[poultergeist]

hahahahahahahahahahahahahahahahaha

[poultergeist]

put a 1 in front of that and I may take you seriously :)

[L14MNP]

You can pick up a P11 GT for 500 quid on occasion, FNSH 90/100k ish. I'd say a grand for yours poultergesit, what's the spec? Doesn't make much difference as I've found though lol

Simps, my mate made a P10 eGT into a GTI-r 4WD, was a hoot. He tried to talk me into using an RB25DET and RWDing mine lol. He has a fwd P11 GTi-R now running about 360bhp last time it was dyno'd. Damn those 'boxes are strong lol. A Primera track car is a rare thing, I know of one P10 eGT and one P11-144, both budget jobs though. It would be nice to do a proper job!
Poultergeist buy me interior and headlights and I will build one and Simps can show me how to drive it lol

[The Simps]

What have you done to me with this thread!!!

I'm going to have a look at a P11 GT next week! lol

[poultergeist]

Simps: they are great cars for the money! :)

L14MNP: why dont I just save you the trouble and buy the whole car off you?!

[poultergeist]

These any good Sulphur?

http://i256.photobucket.com/albums/hh166/poultergeist7/IMG_0957-1.jpg

[The Simps]

Simps: they are great cars for the money! :)

I used to really love driving them when they 1st came out as I'd just passed my test! lol

My dad still works for Nissan and this ones been traded in so VERY good value for money!

Who's best for lowering springs on them? Tein S-tech?

[The Simps]

fully square side on is easiest.

[poultergeist]

http://i256.photobucket.com/albums/hh166/poultergeist7/IMG_0955-1.jpg

[poultergeist]

Yeah I have Tein on mine

[L14MNP]

D2 coilovers for me, but Tein and H&S do decent springs dude

Aye Poultergesit buy the lot lol. Seriously though if I had never had the interior trimmed and bought JDM lights I would strip it and polycarb the windows etc.

Spec yours up with my shiny unused parts lol This is a shameless for sale post lol. Tried to break it on NPOC a while back but they're all tight b4stards. Even worse than in the 'old days' lol

I still say stick with your P1's!

[poultergeist]

I havent got just Tein springs,I've got the fully adjustable coilovers :thumb:

How much you want for it then :)

[poultergeist]

Cant believe were having such an in-depth convo about GT's on a Nova site lol

[L14MNP]

Yeah I thought you'd have coilovers mate. Get good springs though still lol

5 grand dude, total steal TBH but it's the wrong type of car to break/sell as project (or even complete) for decent money!

55K 4dr shell in Aston Martin Tungsten, zero rust, it's on axle stands ATM, no undeerseal, flush engine bay, brand new SR20 and gti-r TB's, brand new 'box, brand new coilovers, GTR 4 pots and 318mm discs, gtr rear brakes, camber adjustable rear beam, 18" raceline rl7's, impreza fr. seats and primera gt rears trimmed in black nappa leather and grey alcan, alcan headliner and A B C pillers, parcel shelf etc. Focal SQ install, brand new JDM dual lights (paid 700 quid :() have the crystal fogs too, p11-144 back end, smoothed blah blah

Buy me :) lol

Yeah, we even roped Simps in lol

[poultergeist]

I think I'll pass thanks,waaaaaaaaaaaaaaaaaaay to much money for me!
Would like some pictures though to see everything you've done to it :)
Email though not on here lol

Buy one Simps,you know you wanna!!

[L14MNP]

haha no-one wants it including it's owner! My ideas are getting out of date now! lol
If it helps I paid 2K for the interior job, see uber bargain for you lol

Dude I barely have any myself lol. I have 1 of it part assembled outside and 1 when the bay is standard before I hid the loom etc. May be some pics on NPOC of when I listed parts, a lot has changed since then though lol. Must get my finger out on it!

Simps will buy it if it's a 500 quidder like a few I've seen lol You can't get a better family car for the money! I'm waiting for the old man a couple of miles away to die lol I want his R reg 4dr GT, which last year was on about 28K. It's about time I killed a few more P11 GT's I usually just kill eGT's lol

[poultergeist]

whats an eGT?

[L14MNP]

z0mg lol. It's a P10 GT dude, early SR20, so a bit more power. Also you get an eZX (rare) no lambda sensor and better cylinder head - some eGT's have the head too. Called high or low port can't remember.\

The motor for mine is an unused early job with an eZX ecu, the angle of the inlet ports are ideal for mating to Sunny GTi-R throttle bodies, despite what the NPOC know alls say lol

I kill all Primeras, even sold parts from a JDM one I broke, that ran an SR18 lol. No-one wanted anything from it at the time, but now it's JDM y0 I could have made a fortune lol

[poultergeist]

never knew there was so many variations!
I know about the GTSE and LE
didnt think the P10's were as good?

[L14MNP]

Some say they are a better drivers car mate cos they run IRS. I looked into fitting it to mine but the standard crap is well crap, but good idea lol

Aye nothing else worth knowing about in the P11 world lol. I wish I had kept the JDM shell! Stevie boy got the bumper and grafted the top half to his GT bumper, looked good.

P10's have a bit to offer IMO, come to think of it I haven't seen one for a while!

I hope we both agree that the P12 sucks the wang though lol
Also LOL @ this convo, everyone above is talking about Novas, on here why on earth for? lol

[poultergeist]

yeah I know,think they're in the wrong place lol

Whats IRS?
Whats the difference with the JDM stuff then?
Anything past the P11 is ghey in my opinion lol

[DW-Nova]

Having an in depth convo here hey ! dont know anything about them myself but i had a go in one and was pleasantly suprised ! a red M reg one, had all black leather inside and seemed to go pretty well, my mate who had one couldnt seem to break it either lol, the engines are pretty bullet proof i guess ? they do seem to go nicley rusty tho !! perhaphs thats why nova owners like them Ha.

[L14MNP]

yeah I know,think they're in the wrong place lol

Whats IRS?
Whats the difference with the JDM stuff then?
Anything past the P11 is ghey in my opinion lol

Independent rear suspension dude, as opposed to the beam of the P11
JDM shell is totally different mate, handbrake is in a different place, rear seats were like Impreza ones. Aerial in the rear 1/4. flat bump strips. Loads of ghey/cool differences. Of course it donated it's power folding mirrors to me also :)
lol P11's are ghey when you can't access your garden vac because one has been SORN in your garage for the last 4 years!

DW-Nova, sounds like that was a 2.0 eGT, yeah they go well as standard. Same power as a 20XE. They are good engines if you keep them serviced, if not bottom end failure is a possibility, oil pick up gets jammed up too, I modded mine for peace of mind. There isn't much call for P10 bits now (your mates shape) but a while ago people wanted P11 parts, I think it's cos the 'proper' Jap stuff is decently priced now so people have moved on!

The rust isn't that bad on them TBH, sill/quarter on P10's and early P11's aren't galvanised IIRC so they go all over but noting serious - watch out for it splitting on the suspension turrets though, nice water trap!
When I removed the underseal from mine I had a load of surface rust in there waiting to get quite serious and that's from a less that 60K mile shell!

[poultergeist]

Aye nothing else worth knowing about in the P11 world lol. I wish I had kept the JDM shell! Stevie boy got the bumper and grafted the top half to his GT bumper, looked good.

So whats the difference with that then?

[L14MNP]

Slightly different style bumper and obviously a JDM sized plate recess lol

[poultergeist]

Noone gonna do it for me?

[L14MNP]

Wasting your time lol. I'll send it to a couple of mates for you dude (and prepare to have the piss took that I changed my mind about painting mine white :() lol

[poultergeist]

Huh?

[poultergeist]

????

[poultergeist]

nicked this pick as these are the wheels I mainly want ;)

http://i256.photobucket.com/albums/hh166/poultergeist7/robscamera097.jpg

[Southie]

It looks like someone has redrilled the wheels to fit :eek:

[L14MNP]

^ I'm with stupid lol

I plan to do this on Weller STEELS but wouldn't on an alloy rim!

[Dod]

It looks like someone has redrilled the wheels to fit :eek:

Nope, thats how they come.

Actually, if it was a nice black colour and the wheels werent white, I'd love that Nova. Rat Look FTW!!

[sulphur]

Back end needs to be a touch lower IMO. :) It does look pretty good though, and I'm not a fan of the rat look.

[L14MNP]

That's mad. Kinda half arsed multifit design lol They look good ont he more door though, and I aint a fan of fake rivets etc

[poultergeist]

They might look good on the P11 too IF someone shops them on there for me!

[L14MNP]

They won't lol hence no-one doing it! It's a subliminal message that you must select better rims before someone will PS it for you lol
You could have learned on digimods in the time this post has been up! lol

[poultergeist]

I dont have photoshop otherwise I'd try it myself,and my gay laptop wont let me download it!!!!
Can someone just colour the existing wheels then,think I may change them to red?
Or leave white with red lip?

[Peanut_119]

you askin me to change the colour of the wheels on your colour to red,

i gave it a go and this is what i have come up with.

http://i687.photobucket.com/albums/vv237/Peanut_119/DSC00588-1copy.jpg

coments welcome :)

[poultergeist]

they look more pink or peach than red?
or is that my eyes?!

[Peanut_119]

i have put on the wheels you asked for but i didn't know if you wanted them in red or white so i have done it in both colours

http://i687.photobucket.com/albums/vv237/Peanut_119/IMG_0955-1redrims.jpg


http://i687.photobucket.com/albums/vv237/Peanut_119/IMG_0955-1whiterims.jpg

[poultergeist]

Thanks!
Just wanted them in white,want my wheels in red :)

[Peanut_119]

they are slightly bigger but the rolling diamiter would be the same

http://i687.photobucket.com/albums/vv237/Peanut_119/IMG_0955-1rims.jpg

[poultergeist]

Thanks Peanut!
I think all the other ideas have gone out the window now I've seen the TSW's on there!!

What does everyone think?

[Peanut_119]

you happy with that mate?

glad to help you out.

[poultergeist]

Very good thanks

Rep for you :)