PDA

View Full Version : Breaknig Nova 1.6 16v



james_sr
01-01-09, 12:01 PM
The time has come for me to sell my Nova!! I have owned the car since March 1999 In that time the car has been through many changes...

The car as it stands was last used as a track weapon. This was mainly built Lee303 fame and myself back in 2004. Since then i have done around 5-6 track days, unfortunately it has sat in storage for the last 2 years. (Starting the engine every now and then)

I will either sell the car complete or will break it, depending on interest.
The car has no tax or Mot as all these ran out 3 years ago. The car is sorn of the road, so you could tax mot etc

The car is in Ruislip HA4

The car was an original a SR model. But now has a tuned 1.6 16v engine fitted.

The Engine was rebuilt by lee303 (Just see his thread for quality of work). All new engine parts were sourced and fitted.

Engine spec
Grind the crack; bore the block, new standard pistons, Dowell flywheel, lightened flywheel, new end bearings, new main bearings, ARP rod bolts, new water pump, new oil pump, head set, and timing belt, blue injectors
F13 Gearbox
The head has been felted slightly by Lee with a little bit of a polish
Novatech supplied the throttle bodies, these work just as good as the likes of Jenvey!! It is fitted with Omex OEM 500.
This was fully mapped and set up by Steve at Track and Road with a power read out of 153BHP.

I will sell the engine complete. £800

I also have the following parts to add to this
Mocal 13 row oil cooler (all pipes and sandwich plate) £100
BTB manifold (all wrapped up) £200
Full power flow exhaust to mate to manifold £200
Blue oil catch tank £30
Fuel reg and gauge £30
Ideally it would be nice for all the engine parts to go together.

All these parts are still fitted to the car; the engine will be the first thing to come off as I would like the person who buys it to see it running etc. Nothing on the car will be sold until the enging is sold..
I will be very sad to see this go as I have had many good years’ fun building the car and using it.
If you can see any other parts I have missed please get in touch
I have full photo history of most of the work carries out
James sr
07887 625183

Jay
01-01-09, 12:06 PM
Interested in the quick rack, is it 2.2 lock to lock?

Jay.

Adam
01-01-09, 12:10 PM
Let me know if you want split the omex.

Are the N/Tech bodies 40mm or 45mm?

Jay
01-01-09, 12:17 PM
.

stevei
01-01-09, 01:25 PM
pm sent:thumb:

k925franny
01-01-09, 01:47 PM
would you post the quick rack and pics the steering wheel

james_sr
01-01-09, 02:12 PM
Thanks for the Pm and response.
I will not be able to break or sell any parts until the engine is sold.. I will leave it for around a 2-3 weeks before i take the engine out?
Ideally i would like to sell the engine as a whole.
i will respond to Pm later.
James sr

MyNovaSr
01-01-09, 03:47 PM
pics of the wheels please

adam c
01-01-09, 03:49 PM
what was/is the full spec of the engine when it ran 153bhp(was it using the BTB manifold?)how many miles has it roughly done?is it using standard cams?

calibra-keith
01-01-09, 04:37 PM
you have PM :thumb:

james_sr
01-01-09, 04:41 PM
pics up soon

james_sr
01-01-09, 04:42 PM
The engine was as it is now with the exhaust, it has standard cams and pistions.

LUXE
01-01-09, 04:59 PM
pm'd

james_sr
01-01-09, 06:47 PM
IMG]http://i463.photobucket.com/albums/qq352/james96992008/gallery_789_2_93892.jpg[/IMG]
http://i463.photobucket.com/albums/qq352/james96992008/rollingroad.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3555.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3559.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3560.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3561.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3562.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3563.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3565.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3568.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3569.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3570.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3572.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3573.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3574.jpg

james_sr
01-01-09, 06:47 PM
http://i463.photobucket.com/albums/qq352/james96992008/gallery_789_2_93892.jpg

james_sr
01-01-09, 06:48 PM
http://i463.photobucket.com/albums/qq352/james96992008/100_3575.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3576.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3593.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3591.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3590.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3586.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3584.jpg
http://i463.photobucket.com/albums/qq352/james96992008/100_3595.jpg

MyNovaSr
01-01-09, 08:28 PM
Are the wheels straight fit, fitment, no spacers required?

Consider a swap for my 17's?

Pete.

james_sr
02-01-09, 08:15 AM
Are the wheels straight fit, fitment, no spacers required?

Consider a swap for my 17's?

Pete.

Yes they fit striaght on, Correct offset, PCD etc.

Unfortunatlly i am selling up so no swaps....

James sr

james_sr
02-01-09, 08:41 PM
Hello right big update.............

Response has been fantastic and offers flying in for most parts! I do not want to disappoint people by taking forever to send out parts so I am withdrawing (temporary) all items apart from the engine (as stated in my first post I do not want to start breaking until the engine is sold) People that have made offers I will keep your details and once the engine is sold and removed from the car I will give you people first refusal before I advertise these.

I have a couple of people looking at the engine this week so it maybe sooner rather than later.

In hindsight I should have not have advertised parts I am probably not at the stage to be selling yet apologies for this.

James

james_sr
04-01-09, 04:47 PM
Hi Hopefully i will have an update next week, Hopefully the engine is sold with all running gear.:D This should be taken out next weekend, i will update then with list of parts left and prices, For people that have made offers i will be in touch with you first.:beer:
James

LUXE
04-01-09, 05:04 PM
Hi Hopefully i will have an update next week, Hopefully the engine is sold with all running gear.:D This should be taken out next weekend
James

Cheers James see you next sataday,cant wait cheers mate!:thumb:

Plug
06-01-09, 05:33 PM
hey mate if your breaking it you selling panals?? what mk is it if so

boffer8
06-01-09, 06:24 PM
Pm'd

james_sr
06-01-09, 09:22 PM
Hi yes i will be breaking. i will start a new thread in the comimg weeks with parts left after the engine has come out. What are you after??
james

Plug
06-01-09, 11:34 PM
im after front mk1 wings you got any and will posty?

pm with info please

Jimbo