4 stud v6 brakes with goodies

[Nobby]

I have a set of 4 stud v6 calipers off my calibra with drilled discs and newish pads also come with front 2 goodrich braided hoses good condition claipers are white im looking for £60 may be able to post cheers

[napalm_27]

interested mate but il check the funds 1st lol
what are the size of the discs?

[Nobby]

not sure yet mate i think they are v6 as they look alot bigger than the 1s on my cavi lol ill measure them tommorow and get some pics up

[napalm_27]

ok mate cheers
mine is a bit shakey under heavy braking
think mine have got a serious case of the mr floppy lol

[Matt]

Any pics?

[Jay]

They should be 288mm.

[John]

They should be 288mm.

thought callys were the same as cav at 286?

[Jay]

thought callys were the same as cav at 286?

Ahh think you may be right John, search is my friend! :D 288mm was veccy v6.

[Nobby]

the discs are 5 stud drilled to 4 stud and have a spacer in so should be larger brakes? fiat 1s?? i havent measured them yet but do look larger than standard 16v brakes - prov sold to will f

[Will F]

;)

[ck]

if they have a spigot ring in the centre of the disc then defo a v6/turbo disc.

the early cav/cal v6 and turbo's had 284mm discs and 54mm piston calipers (better for nova's and corsa's)

the late cav/cal v6 and turbo as well as all 5stud vectra's were fitted with 288mm discs and 57mm piston calipers (can cause long pedal on nova's and corsa's)

[Nobby]

if they have a spigot ring in the centre of the disc then defo a v6/turbo disc.

the early cav/cal v6 and turbo's had 284mm discs and 54mm piston calipers (better for nova's and corsa's)

the late cav/cal v6 and turbo as well as all 5stud vectra's were fitted with 288mm discs and 57mm piston calipers (can cause long pedal on nova's and corsa's)

cheers for that mate as i said they are 5 stud drilled to 4 and have a spacer in the middle:thumb: