xe hammer lol

[General Baxter]

now i don't want to cut and weld the leg to encourage rust and rot,

so where about to people smack the leg to get clearance lol

[Dar]

Everywhere!

[Asa-James]

do we really want to be telling you where to use a hammer mr baxter? just leave it well enough alone...

[Spudly]

Id let someone else do it nick, if you hit it with your man-hand-clubs then you will know the chassis leg off ffs lol

[Martin]

im ina realy bad mood shall i come and punch feck out of it until i make enough clearance or until my hands fall of atleast?

[Riggy]

http://img.photobucket.com/albums/v13/riggy4/general%20pics/Image335.jpg


still hits under hard left corners , so either go deeper or get some sold mounts like im goin to

[General Baxter]

allready running soilds got a complete set of ebay (blue ones) for £40

engine, gearbox and rear :p

alltho iv only got the engine one fitted lol

[Rich]

Sure i saw somone heated it up with a blow torch and then hammered it, alot easier and will look better

[Jonlem]

http://img.photobucket.com/albums/v13/riggy4/general%20pics/Image335.jpg


still hits under hard left corners , so either go deeper or get some sold mounts like im goin to

Not hitting it hard enough, one tick I'll find a pic of the solution

[Jonlem]

http://img.photobucket.com/albums/v306/Jatec/Nova%20Race%20Car/NCR67.jpg

Using these Sabo prepared engine mounts :

http://img.photobucket.com/albums/v306/Jatec/Nova%20Race%20Car/NCR79.jpg

[Pistol Pete]

lol thats a serious knocking stick. I'm thinking sledge hammer to crack a walnut lol

[Lee]

I have a tenner here that says when Nick hits the chassis leg with a hammer, and the car falls over on its side lol

[General Baxter]

well i dont know yet, x16 or c20 lol

[Jonlem]

I hit the seat mounts with a smaller sledgehammer and the floorpan came away from the sill lol lol

Rotten shells ftw

[Tim]

heres a pic of mine blow torch and a hammer, its actually much deeper than it looks, got some solid mounts so hoping its going to be enough, planning on doing a trial fit of the engine first

http://i83.photobucket.com/albums/j307/t1mmmmy/novawip013.jpg

[dhdev (Oli)]

http://img.photobucket.com/albums/v306/Jatec/Nova%20Race%20Car/NCR67.jpg



Nowt like doin it stylishly with a set of loafers lol