View Full Version : astra gte digital dash
bigdan1
09-12-08, 11:10 AM
right my mates selling an astra gte dash and a nova gsi spoiler for £20
obviously im gonna buy them lol but the dash dont have the transducer!!
is there any chance it will still work without this or will i have to buy a new one?
any help would be nice thanks
can use one from a 1200SPi apparantely, but never seen it done myself, the gte dash transuce MUST be the right code for the dash if you can source anoher one,.
brainsnova
09-12-08, 11:27 AM
also fiat tempra has one.
bigdan1
09-12-08, 11:28 AM
ok cheers lads ill have a browse on ebay see what i can find!!
brainsnova
09-12-08, 11:30 AM
new from gm £30 so borrow one from the scrappies lol
bigdan1
09-12-08, 11:42 AM
lmao i jus sin one on ebay £22 i fort s$*t the bed lol
im only payin that for both items
i doubt theres a chance of a gte bein in the scrappy 2bf mate
even if there is wud the dash still be there lol
its one of the 1st things to go me thinks
brainsnova
09-12-08, 11:50 AM
there will be plenty fiats with the digital speed display and they look identical but i never wired one up.
bigdan1
09-12-08, 12:03 PM
ok 2 the scrappy on friday lol
fiat heaven lol
cheers lads =]
dont bother looking on ebay they can go up to £50. just look around in scrappys is the best bet
Corsa ones work too don't forget. I used on from an R reg 1.2 and it worked a treat;)
bigdan1
09-12-08, 02:24 PM
Corsa ones work too don't forget. I used on from an R reg 1.2 and it worked a treat;)
ok mate sounds like my best bet =]
how much you reckon i could get one for then £10a from scrappy
i also need to know how to wire this dash up because iv heard they am hard to fit!
brainsnova
09-12-08, 02:43 PM
there is a dash guide on here but dont pay at the scrappies they have ripped us off for years lol
bigdan1
09-12-08, 04:38 PM
there is a dash guide on here but dont pay at the scrappies they have ripped us off for years lol
ok ill have a browse =]
an yeh i actually have 5 finger discount on 95% of the stuff an buy like a relay haha
I bought a 1.2 SPI transducer from the scrappy for £1 and it works fine with the digidash.
They do work fine, but it wont be 100% accurate
I found it's as (in)accurate as a proper digidash transducer.
Simple to wire
http://i516.photobucket.com/albums/u324/adam_den/DigiDashTransducerWiringMedium.jpg
brainsnova
10-12-08, 04:40 PM
the brown and black route throught the bulkhead and connect to the digi dash were all the blacks and brown connect up:thumb:
I found it's as (in)accurate as a proper digidash transducer.
As above she is correct......lol
Ive used two 1200spi ones personally and wired a mates in using one aswell:thumb:
brainsnova
10-12-08, 04:46 PM
for a laugh phone vauxhall for the price for a new digi dash it will seem an absolute bargain getting one for under £30 lol
bigdan1
10-12-08, 06:48 PM
for a laugh phone vauxhall for the price for a new digi dash it will seem an absolute bargain getting one for under £30 lol
lol well im guessing about £80 as on ebay there £50 starting lol
im defo buying it i have got him down to £15 for the spoiler and the dash now because i told him its no good without the transducer (A)
how lucky am i lol ... lets hope it works =D
bigdan1
10-12-08, 06:49 PM
As above she is correct......lol
Ive used two 1200spi ones personally and wired a mates in using one aswell:thumb:
all good then im venturing down the scrappy friday see what i can find =]
i myt get a few different ones just incase like lol
what do you get these tranducers off your on about?
1200 spi novas?
Yeah, they have the 3 wire plug as well as a normal mechanical spinning thing.
Yeah, they have the 3 wire plug as well as a normal mechanical spinning thing.
cushty!
so do you just take the whole shabang then aye? the mechanical spinny thing and the 3 wire plug
cushty!
so do you just take the whole shabang then aye? the mechanical spinny thing and the 3 wire plug
Its all one piece, it has a plug about four inches up the loom which obviously you unplug or chop off above the plug so you have the needed wiring, then its a black plastic thing that screws into the box and the speedo cable just screws into the top of it.
Its because the 1200 spi has a mechanical speedo drive but also needs the speed signal from the gearbox to ecu so it pulses exactly the same way as a normal transducer does and therefore works the digi dash.
Oh and for who said they rang vaux for a price on a new digi clock set iirc theyre about £500 + vat and im fairly sure my mate bought the last one available in the uk from wilson and co vauxhall in scunny:thumb:
bigdan1
13-12-08, 07:37 PM
cheers guys im sure i could do it now i have bits of info off everyone =D
i tried it today just connected a few wires and also the rev counter and it came on and tested itself seem to work fine anyways.. just need a back light bulb and a few instrument bulbs lol =]
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.