Blydenstien 2l 8v B+ Head

[actionman]

ANYONE INTERESTED, ITS DONE ABOUT 6000 MILES SINCE I BOUGHT IT DIRECT FROM BILL.

OFFERS. :thumb:

CHEERS
ALED

[General Baxter]

50p

[Adam]

You need a price

[actionman]

UMMM I DONT KNOW £200 ISH????:roll:

[MW-tuning]

How much work & what exactly has been carried out?

[actionman]

Ok. A B+ Head Is The Ultimate Head For A 8v Fully Ported And The Biggest Valves The Head Will Take It Comes With A Sri130 Cam And Carrier, I Can Even Supply A Head Gasket And Bolts Which Are Left Over From Another Project I Had.

[scoobyeater]

can u send me pics also what are the valves brass? also if have the biggest valves has it been bored?

[actionman]

DUNNO WHAT THEY ARE BUT THEY ARE NOT BRASS??

YES IT HAS BEEN BORED, WILL SEND SOME PICS ASAP:thumb:

[MW-tuning]

send some pics to me aswell mate

[chrex]

is the £200 a base price because you need one? or is that how much you're actually after??

[actionman]

is the £200 a base price because you need one? or is that how much you're actually after??

Anything in that region i will be happy with

[Ash]

can u send me pics also what are the valves brass? also if have the biggest valves has it been bored?

I believe you mean bronze valve guides!?

http://www.google.co.uk/search?sourceid=navclient&hl=en-GB&ie=UTF-8&rlz=1T4GGIH_en-GBGB231GB231&q=bill+blydenstein

^For those who don't know who Bill is/was :roll:

To help, I have a E16SE B+ head which has +1mm oversized valves on exhaust side and +2mm on the inlet side IIRC 'port and polishing' to match. A healthy skim and came with uprated, but not bronze unless you spec them, valve guides. Also the oversized valves are of very high quality - I forget the make ATM.

This is the best head you'll get for this engine. Good luck with the sale mate - I'll take my commission now lol

[actionman]

Cheers mate IOU a pint:thumb:

[just vaux trev]

pm best price please bud,
anyone know what sort of gains,
have you a recipt for works caried out

[MW-tuning]

Pm me best price mate

[craig green]

pm best price please bud,
anyone know what sort of gains,
have you a recipt for works caried out

Likely gains will be considerable torque, much smoother running in general & depending on your spec/age/condition of engine maybe 10bhp or more.

Thats good on an N/A engine to get a bolt on mod to add that power esp at the ball park price he is asking.

If I had an 2.0L NE/SEH this would be in a parcel with my name on already!

[MC]

I would like to add that you will not find a better head for this engine. Bill was a legend! I've had 3 of his cylinder heads, CP has had 2 and I can't speak highly enough of them.

I believe the inlet valves will have waisted stems too.

[Stuart]

gents, this isnt ebay... will the seller put the EXACT price he is after in the thread.