sbd tp208 throttle bodies

[matthew172]

gauging intrest in my throttle bodies and inlet manifold, complete setup

They are sbd taper bodies and run on mbe management the ecu is 912 iirc, the loom uses the standard dizzy and coil setup for ignition

£1100

[mov3d]

Possibly ineterested, what is included in the 'complete setup' ?

[scott.parker]

Possibly ineterested, what is included in the 'complete setup' ?

On SBD site.

http://www.sbdev.co.uk/Taper%20Kits/New%202.0L%20Taper%20Kits/2.0L%20TP%20kits%20introduction.htm

[mov3d]

If the ecu is the 912, its not remmapable unless its done by SBD.

Can you double check the ecu, thanks :)

[badassnow]

If the ecu is the 912, its not remmapable unless its done by SBD.

Can you double check the ecu, thanks :)

iirc it is ignition only

[matthew172]

cant find any numbers on it as the sticker is abit torn etc but its not a 967 anyway, it has a socket to plug a laptop into though

they have just been freshly bead blasted and all linkages freshly zinc plated silver

im not selling them with the dizzy, coil or fpr, whoever buys them will need to use there own

[white2lSR]

How come your selling these? up grading?

[matthew172]

btt

[james_19]

these still for sale??

[matthew172]

yes

[matthew172]

all linkages have been freshly zinc plated and all bolts replaced with stainless, i was going to use these but due to change of plan im not, some pics

http://i127.photobucket.com/albums/p157/matthew172/DSC05143.jpg

http://i127.photobucket.com/albums/p157/matthew172/DSC05145.jpg

http://i127.photobucket.com/albums/p157/matthew172/DSC05149.jpg

http://i127.photobucket.com/albums/p157/matthew172/DSC05151.jpg

http://i127.photobucket.com/albums/p157/matthew172/DSC05152.jpg

http://i127.photobucket.com/albums/p157/matthew172/DSC05153.jpg

http://i127.photobucket.com/albums/p157/matthew172/DSC05154.jpg

http://i127.photobucket.com/albums/p157/matthew172/DSC05156.jpg

[matthew172]

sold