PDA

View Full Version : 1.6 turbo again



C14se
07-12-08, 03:06 PM
how much will it cost to get conversion kit and fit it all and how much bhp will it run just want to find out some bits about 1.6 turbos
Thanks
:thumb:

burgo
07-12-08, 03:11 PM
there is no conversion kit as such and how much power depends on how much you want

Novasport
07-12-08, 03:11 PM
To convert a Nova GTE 8v engine or a Corsa Sport/GSi 16v engine to turbo? Or a conversion kit to fit the new Corsa VXR unit?

Jay
07-12-08, 03:12 PM
Have you tried in here mate, bet theres loads...

http://www.pngclub.com/forum/search.php

Sloth
07-12-08, 03:52 PM
or www.vaux-extreme.com (http://www.vaux-extreme.com) join and search for salkm

sport
07-12-08, 04:45 PM
Courtenay sport used to do it for around £3000 and quoted 150 bhp.

ck
07-12-08, 04:50 PM
the turbo that comes fitted to the new corsa vxr is a direct fit for a c16xe/x16xe :D

C14se
07-12-08, 05:06 PM
well if Courtenay sport is not doing them no more wat parts will i need to do it all

wilson_sri
07-12-08, 05:09 PM
Turbo manifold, decompression plate, turbo, dowpipe, intercooler, intercooler pipes and hoses, oil filter relocation kit, FPR and you will need to put a return pipe into your sump for the oil return on the turbo.

Mike
07-12-08, 05:22 PM
well if Courtenay sport is not doing them no more wat parts will i need to do it all

Hope you got a lot of spare time aswell chap ;)

matt_vaughan
13-01-09, 07:20 PM
Theres a lad on here doing his own turbo conversion on a 1.2. Making a proper pro job of it by the looks of it too. Search and yee shall find.

Mike
13-01-09, 07:54 PM
Making a proper pro job of it

:tard: not from the pics ive seen?

Novaboyleon
13-01-09, 10:16 PM
Turbo manifold, decompression plate, turbo, dowpipe, intercooler, intercooler pipes and hoses, oil filter relocation kit, FPR and you will need to put a return pipe into your sump for the oil return on the turbo.

is it really as easy as you just made it out to be? as im seriously looking at doing this, was thinking about puttin low compression pistons and that in but is the sandwich plate easier and you have to use 2 head gaskets?

General Baxter
13-01-09, 10:18 PM
the turbo that comes fitted to the new corsa vxr is a direct fit for a c16xe/x16xe :D

oh really ?

craig green
14-01-09, 04:03 PM
is it really as easy as you just made it out to be? as im seriously looking at doing this, was thinking about puttin low compression pistons and that in but is the sandwich plate easier and you have to use 2 head gaskets?

I'll take a set of these low comp pistons chap! lol

Southie
14-01-09, 04:07 PM
the turbo that comes fitted to the new corsa vxr is a direct fit for a c16xe/x16xe :D

Your source please :confused:

craig green
14-01-09, 04:31 PM
Surely simply comparing the exhaust gaskets from a 1.6 VXR & a Corsa GSi would be a way of knowing for sure?

It's been posted around the net from numerous sources.

Novaboyleon
19-02-09, 06:42 PM
whats the 1.6 go like with a turbo on? also are they reliable?