PDA

View Full Version : remapping-c20let?


let_nova
23-11-08, 07:50 PM
as above. is it poss? i got told that it was harder as they were anologue? is this true. thanks.:thumb:
Stuart
23-11-08, 08:10 PM
chips. done
Adam
23-11-08, 10:47 PM
EVO5 chips ftw
Paul
24-11-08, 06:12 PM
you cant map motronic software afaik.
let_nova
24-11-08, 08:54 PM
ok thanks for info. where can evo 5 chips be bought??
Paul
24-11-08, 08:59 PM
speak to Beardy on MIG :)
S1 RST
24-11-08, 10:07 PM
you cant map motronic software afaik.

yes you can just gotta have the right software to do so:roll:
craig green
25-11-08, 12:34 PM
yes you can just gotta have the right software to do so:roll:

And still suffer the same reliability issues with the loom & sensors.

MSD that can do it IIRC.
S1 RST
25-11-08, 02:49 PM
And still suffer the same reliability issues with the loom & sensors.

MSD that can do it IIRC.

well if they not fuked and have 10 yr old sensors to start with you have a fighting chance
craig green
25-11-08, 02:57 PM
Lets face it, most LET issues stem from the loom.

A new loom bought from Vauxhall is more than most Vauxhalls are valued at. Add the live mapping costs & no doubt extra stuff you'd need for it to be mapped & it will get close to a standalone setup... No brainer.
Bubba
25-11-08, 09:59 PM
EVO5 chips ftw

imported german EDS Phase 4 :P
Paul
26-11-08, 10:04 PM
yes you can just gotta have the right software to do so:roll:

AFAIK= as far as i know :roll:

Why you would want to piss about with it anyway is beyond beleif, its dogshi.t

The youngest loom is over 10 years old, the wires are so weathered and pony they probably carry 5% of the current they're meant too.

90% of ECU's have been ripped apart by some numpty cun.t to put chips into, so theyre probably all fecked.

Seeing how cheap aftermarket management is, and how well it actually works you'd be a fool to even consider mapping bosch motronic.