calibra full shell dismantal

[brainsnova]

since i have far too much time on my hands im going to drill all the spot welds out my calibra and take it apart like before it was welded together on the production line :tard: lol :eek:

[Sturge]

you must be reeeeeeeeeeeeally bored! It WILL take days btw

[muzzy]

hope you have plenty drill bits lol

[brainsnova]

free power and all the time in the world lol lol lol lol

[muzzy]

will be interesting weighing it in panel by panel lol

[brainsnova]

i was going to tow it along but scrap value has dropped and i have a van anyway so ive had a mk2 golf cut up in my mates sprinter good times.

[muzzy]

im tempted to do that with my Nova, ive been told the scrappys are saying they wont take cars with wheels now because they dont want to pay for tyre disposal.
So they come along and dig your driveway up at the same time as taking the car lol

[brainsnova]

novas have to be sold on not scrapped and you can dump the tyres at your local council tip for free.

[muzzy]

if someone is after a bare shell with no front end then pm me with your offer!

I can easy get the tyres off but that leaves the car sitting on discs and drums, cant get a hi-ab down to where my shed is only a beaver tail

[Dod]

I havew a better idea, I did something similar with a pair of Astras but without a Drill

Started as:
http://i3.photobucket.com/albums/y92/Dods1/f9d91d4a.jpg
Mid way:
http://i3.photobucket.com/albums/y92/Dods1/3e4974e7.jpg
Ended as:
http://i3.photobucket.com/albums/y92/Dods1/Pic816.jpg

And from this:
http://i3.photobucket.com/albums/y92/Dods1/Pic492.jpg
To this:
http://i3.photobucket.com/albums/y92/Dods1/Pic515.jpg

[Spudly]

Smashy smashy lol

[Emmy]

You sure took that to pieces then Dod. lol

[Emmy]

Yeah why not eh brainsnova, like you said you have time on your hands so seems a good idea :thumb:

[Philsutton]

that wll take weeks, the sills on them are about 3 / 4 skins thick. It took me a day to cut the boot floor out of one with a hack saw lol

[brainsnova]

im a bit mad though im going to start on the rear quarters and inside.

[Philsutton]

seriously you'll get half hour into it an go naaaah **** that

[mowgli]

http://tbn0.google.com/images?q=tbn:44gB7bwcA21cFM:http://www.itsforhire.co.uk/stihl1.jpg (http://images.google.co.uk/imgres?imgurl=http://www.itsforhire.co.uk/stihl1.jpg&imgrefurl=http://www.itsforhire.co.uk/skips.html&usg=__RwIpSMPvaxn3n4nqTObTz9jr3jo=&h=924&w=1401&sz=207&hl=en&start=14&tbnid=44gB7bwcA21cFM:&tbnh=99&tbnw=150&prev=/images%3Fq%3Dstihl%2Bsaw%26gbv%3D2%26hl%3Den%26saf e%3Doff)
anything else is a waste of time & effort...

[Benn]

Should have sold both shells on. Dont look to rusty.

[Philsutton]

^^ who rebuilds calibras though?

[Benn]

Pic of a red mk2 astra on the first page...

[Sturge]

I took my gte to the scrappy, in the back of another nova! Yes a nova shell WILL fit in a nova

[hendrix]

^^ who rebuilds calibras though?
me lol

[Jack]

All hands, Cap'n Hendrix on deck, poot poot lol

[Spudly]

According to your profile though dont you kill calibras though andy, and i aint seen any rebuilding going on with ye olde banana beast hahalol

[brainsnova]

second thoughts im going to chop the roof off and take off the complete rear quarters then go mad with the styhl saw :wisewood: