Jack
16-11-08, 02:35 PM
Had a look in my loom for a green wire, and couldn't find one (well, not one that goes to the coil anyway) so I'm going to run a new cable.
The wire needs to go from the coil negative to the dials, yes? (cav dials, has a green tach wire on the back ready and waiting to be connected up).
Which wire do I splice the cable on to:
http://i13.photobucket.com/albums/a266/razorjack/Cars/Project%20Ghey/08112008805.jpg
There's a blue cable on the left, a red cable on the right, and a multiplug in the bottom right which has 4 wires inside it - there's a green cable in that plug, but I can't see where in the loom it goes to. Certainly doesn't seem to go anywhere near the dash...
[edit] Also, there's a green wire laying about which you can see to the right of the coil. This has an odd L-shaped connector on the end - any idea what thats for? Seems like the wire goes along the front of the engine bay...
The wire needs to go from the coil negative to the dials, yes? (cav dials, has a green tach wire on the back ready and waiting to be connected up).
Which wire do I splice the cable on to:
http://i13.photobucket.com/albums/a266/razorjack/Cars/Project%20Ghey/08112008805.jpg
There's a blue cable on the left, a red cable on the right, and a multiplug in the bottom right which has 4 wires inside it - there's a green cable in that plug, but I can't see where in the loom it goes to. Certainly doesn't seem to go anywhere near the dash...
[edit] Also, there's a green wire laying about which you can see to the right of the coil. This has an odd L-shaped connector on the end - any idea what thats for? Seems like the wire goes along the front of the engine bay...