PDA

View Full Version : Front wing removal



areofall
09-11-08, 10:20 AM
Hi, just wondering how easy or hard it is to remove the front wings. Think they are just bolted but I remember somethig about a spot weld? The wing have never been off the car so I take it they are seam sealed in some way. any advice/tips would be great. Thanks.

Mike
09-11-08, 10:21 AM
Peice of pish matey, bolt on - bolt off jobbie.

Remove all the bolts across the top of the wing, remove bumper, remove two bolts from the inside the wheel arch where the wing joins the front panel, remove under dash tray and side panel to gain acess to the 2 remaining bolts.

Remove headlight and indicator, lift wing off car. Job done.

areofall
10-11-08, 07:32 PM
thanks !

ade
10-11-08, 07:54 PM
dont forget to reseal the wing when refitting - use a proper mastik and not silicone sealer!

Dave.
10-11-08, 07:57 PM
Peice of pish matey, bolt on - bolt off jobbie.

Remove all the bolts across the top of the wing, remove bumper, remove two bolts from the inside the wheel arch where the wing joins the front panel, remove under dash tray and side panel to gain acess to the 2 remaining bolts.

Remove headlight and indicator, lift wing off car. Job done.
also theirs one on the sill aswell :thumb:

Asa-James
11-11-08, 12:34 AM
11 bolts in total iirc...

Riggy
11-11-08, 10:48 AM
also theirs one on the sill aswell :thumb:


lol was waiting for someone to mention the one on the sill, dave to the rescue lol

DW-Nova
11-11-08, 10:10 PM
be careful when unbolting the 2 fixing inside the car as they are easy to drop and a complete nightmare to get back if you do as they fall down into the sill !!