paul james
05-11-08, 07:11 PM
I put new disks and pads on last week, (astra 2.0 ones), all seemed fine. Driving this morning to work however, I hear a bang, brakes don't work properly, then car comes to a stop and wont shift. When daylight showed up, I discovered that one of the caliper bolts had decided to go solo from the rest of the car, and the caliper then got jammed into the wheel, and as caliper is stronger than alloy wheel, alloy wheel has now been lightened a fair bit.
I know I did the caliper bolts up quite tight, but obviously they need to be done up super tight or they unscrew themselves and go off for an adventure somewhere :mad:
Anyways, I could now do with a caliper bolt for a 256mm disk holding astra caliper.
And I'd also like a MK3 Astra Sport alloy wheel to replace the one thats been munched. I'm not bothered about a tyre, as I'll use the current one, as long as the alloy itself is in good shape.
This type (15"):
http://i10.ebayimg.com/02/i/001/14/3f/22cb_1.JPG
Can anyone help?
I know I did the caliper bolts up quite tight, but obviously they need to be done up super tight or they unscrew themselves and go off for an adventure somewhere :mad:
Anyways, I could now do with a caliper bolt for a 256mm disk holding astra caliper.
And I'd also like a MK3 Astra Sport alloy wheel to replace the one thats been munched. I'm not bothered about a tyre, as I'll use the current one, as long as the alloy itself is in good shape.
This type (15"):
http://i10.ebayimg.com/02/i/001/14/3f/22cb_1.JPG
Can anyone help?