t45_ste
27-10-08, 05:59 PM
Once again i may be changing my plans! I would need to sell my engine first though. Engine has just been re-built not run yet. The spec is as follows:
Bottom end
ARP rod bolts
Steel con rods
Omega 80.00 mm forged pistons
SBD steel idler rollers
Cometic 1.3mm laminated metal head gasket
New water pump
Top end
ARP head stud kit
Ported and polished cylinder head
SBD Titanium valve cap
SBD valve spring platform
Bronze valve guides
SBD double valve springs
SBD solid cam followers
SBD underground shims
Pair of SBD/Kent 295 degree, with 11.60mm lift cam shafts
SBD/Kent vernier pulleys
SBD/Jenvey inlet manifold
SBD/Jenvey Taper throttle body kit with 90mm trumpets
SBD fuel rail
MBE 967 engine management
SBD wiring harness
Cool running stat
Modified cam cover for dry sump system
Needs BTB exhaust manifold (or equivalent), injectors and dry sump system to finish or can just change cam cover back to standard in order to run standard (new and fitted) oil pump.
Also comes with roose silicone hoses
Offers in the region of £3900.
PM me or email stephen1_edwards1@hotmail.co.uk
Tel: 07969589203
Ste
Expected to make 190/200 bhp with 140lbft torque
http://i227.photobucket.com/albums/dd315/ste_ed/Image017.jpg
Bottom end
ARP rod bolts
Steel con rods
Omega 80.00 mm forged pistons
SBD steel idler rollers
Cometic 1.3mm laminated metal head gasket
New water pump
Top end
ARP head stud kit
Ported and polished cylinder head
SBD Titanium valve cap
SBD valve spring platform
Bronze valve guides
SBD double valve springs
SBD solid cam followers
SBD underground shims
Pair of SBD/Kent 295 degree, with 11.60mm lift cam shafts
SBD/Kent vernier pulleys
SBD/Jenvey inlet manifold
SBD/Jenvey Taper throttle body kit with 90mm trumpets
SBD fuel rail
MBE 967 engine management
SBD wiring harness
Cool running stat
Modified cam cover for dry sump system
Needs BTB exhaust manifold (or equivalent), injectors and dry sump system to finish or can just change cam cover back to standard in order to run standard (new and fitted) oil pump.
Also comes with roose silicone hoses
Offers in the region of £3900.
PM me or email stephen1_edwards1@hotmail.co.uk
Tel: 07969589203
Ste
Expected to make 190/200 bhp with 140lbft torque
http://i227.photobucket.com/albums/dd315/ste_ed/Image017.jpg