a few let questions

[belly257]

just looking for some help, erm on my let i am not sure where these sensors go? the first is this one on the throttle body? there is also another pipe on the back of it and anothere pipe which sucks air slightly when he cars running on side of throttle body,
http://i257.photobucket.com/albums/hh212/belly257/Letsensor.jpg

and this one on end of the reciric valve on the turbo
http://i257.photobucket.com/albums/hh212/belly257/Letsensor2.jpg

anyone help? ive done a search but can't find what i need to know thanks

[Lee H]

Top one is hot start valve. You can bypass this by running the vacuum to the fuel regulator instead but leave it plugged in to stop the ECU light coming on.

Recirc valve needs a vacuum going to it as well from the inlet.

Pipe from the drivers side of the throttle body needs to go to the ECU.

[belly257]

Top one is hot start valve. You can bypass this by running the vacuum to the fuel regulator instead but leave it plugged in to stop the ECU light coming on.

Recirc valve needs a vacuum going to it as well from the inlet.

Pipe from the drivers side of the throttle body needs to go to the ECU.
ok thanks mate will sort it tomoz:thumb:

[R1CH]

If its got an aftermarket dump valve fitted then there wont be a vacuum pipe going to the recirc valve (the valve should also have been blanked off inside if not being used).

[belly257]

no aftermarket dumpvalve fitted mate

[ck]

www.max-boost.co.uk is your friend