jim sri
26-10-02, 07:26 PM
ok, i have got hold of some rear discs from a cav sri, i basically removed the whole disc/hub assembly(with the back plate bit in place that the handbrake cable goes in). i also got a nova rear axle beam to work on.
what i need to know is,do i offer the nova beam up to that backplate bit,or does that have to be removed first?if so-how?!?
will the rear disc setup make my wheels rub,mine is lowered 60mm and running 16's-very close to outer arch after rolling.
also-just to check-the rear calipers are towards the back of the car with the bleed nipple to the top of the caliper?
anyone got any pics of this mod that could be emailed? :?
jameshardie@btopenworld.com
what i need to know is,do i offer the nova beam up to that backplate bit,or does that have to be removed first?if so-how?!?
will the rear disc setup make my wheels rub,mine is lowered 60mm and running 16's-very close to outer arch after rolling.
also-just to check-the rear calipers are towards the back of the car with the bleed nipple to the top of the caliper?
anyone got any pics of this mod that could be emailed? :?
jameshardie@btopenworld.com