Log in

View Full Version : cammed 20xe and coscast dispac C20xe and other xe bits



dumpycorsa
04-10-08, 09:30 PM
Hi.I'm selling 2 engines which are currently complete (apart from a couple of ancillaries) may remove the heads if I get a good offer.

The first engine is a cammed 20xe with complete wiring loom,ECU,eco tec pipe,cut down exhaust manifold to fit a nova without lowering the anti roll bar. Also has the inlet with cream injectors alternator etc. Just removing the starter and thermostat housing and leads from this for my new engine. The engine smokes and leaks oil from the oil pump gasket. The cams are Autosprint fast road/trackday cams 260deg duration.They've been in the engine for 1500 - 2000 miles. Engine does still pull well but like I've stated smokes under acceleration. Believed to be rings but not certain on that.Doesn't lose water and starts/runs fine.£225 all in or may split for less

Second engine was removed from a 1994 Opel calibra with 100,000 miles on the clock. The F20 box is with this engine if thats is needed but the threads for the front mount need tapping and helicoiling. This is a genuine Cos cast dispac head with the location lugs on the head. Is missing the cam and crank sensors. Also the injectors and cambelt/plug covers are missing. Comes with complete loom and ECU.£275 all in

Delivery can be arranged for these engines at a cost depending on the mileage.

I also have an xe inlet complete with fuel rail and cream injectors £25 and a 20xe exhaust manifold (without lambda sensor hole) with a corsa mating flange welded on the end £25. Collected on these items unless your having an engine then I will put it all in the van for you.

Cheers Davehttp://www.migweb.co.uk/forums/images/smilies/beer.gif

dumpycorsa
06-10-08, 05:08 PM
bttt

dumpycorsa
11-10-08, 04:16 AM
bump

dumpycorsa
14-10-08, 06:56 PM
offers on dispac coscast head?

badassnow
15-02-09, 06:30 PM
do you still have the cams ?
will you sell seperate