My Let's Rolling Road Results

[game1]

Last night I had the car put on the rollers to check the fueling and to see what power the car is running.

There was the the tuner and myself in the car and two people kneeling on the front wings to hold it down.

It made:-

323.3bhp @ 4985rpm @ fly
268.2bhp @ 4985rpm @ wheels
475.6nm - 350lb-ft @ 4235rpm

The car is running a GT2860 @ 1.5bar. The plugs were blowing out at just over 5000rpm and it was starting to spin on the rollers. Will be going back in a month or so to have a boost controller fitted and some better plugs. Hope to see 350bhp+ out of the car.

Will scan and post graph and pics over the weekend, one very happy chappy :D

[JSeymour]

good results, bet that thing flys!

[Ben]

Any other spec on it?

[loggyboy]

http://www.pngclub.com/forum/showthread.php?t=104762


what did the respray end up like?

[game1]

Respray has come up really well. Did the floor plan, sills and touched up a few little bits. Gsi skirts are on and match the bumpers. Have fitted a matching yellow pin stripe in the bumpers too. Now have 15" team dynamic 1.2 wheels on it aswell. Car looks really well. Just need to fit the perspex windows.

Next mod is to fit equal length drive shafts as it's all over the place at the moment lol

[Nobby]

i bet thats got some torque steer!!

[RJM25R]

What internals are you running for that kinda power?

[Adam]

Very nice results mate, sounds about right tbh.
What software is it on? Evo5?

[game1]

Only internals that are stock are rods and crank. Standard rods are supposed to be good for 400bhp :confused: It's running eds phase 3 :thumb:

[game1]

A few quick pics from last night and the graph :D

http://i82.photobucket.com/albums/j247/MATTYGREEN/DSC02829.jpg

http://i82.photobucket.com/albums/j247/MATTYGREEN/DSC02831.jpg

http://i82.photobucket.com/albums/j247/MATTYGREEN/nonapower.jpg

[The Simps]

excellent results, you must be chuffed to bits.

yellow pin stripe looks great.

can't recommend fitting the equal shaft setup enough.

[Adam]

Looks sweet.
Get it out in the light, and get some decent pics though :)

[craig green]

Try a smaller plug gap.

Great results btw.

[game1]

:D cheers for the comments.

Will clean the car and take some better pics soon :thumb:

[Pistol Pete]

Car looks good and a good RR result.

[ck]

i've allways heard 400bhp on new conrods but thats on the very limit and wont last long, to be safe 350hp on new con rods. 300hp on used conrods.

i know the pulsar boys use standard rods at around 400hp but even with these there not good enough, my mates threw a rod at 341bhp, made a right mess.

steel rods are the way forward and there only cheap these days