1.6 Nova Turbo Being Broken - All parts to go!!

[GDN16v]

Here is a list of parts off a 1.6 nova turbo being broken + a few other bits. Pics later!!

Engine C16SE, lowered compression for the turbo conversion - Provisionally sold!
spec of the engine is:

Rebuilt, with new bearing bolts gaskets etc
1650 using new oversize pistons (not low comp ones)
3mm spacer plate
Polished crank
Lightly ported and polished head

[adam c]

is the rear strut a weld in/bolt in type that fixes onto the rear arches?or does it bolt onto the top of the rear shockers?

[calibra-keith]

hi have you got pictures of the front and rear strut brace ?

[RSTChris]

Im after the header tank and everything to convert the rear of my nova for 5 stud, how much mate

cheers

[adam c]

also any pictures of the seats?are they are the ones with the big head restriants?

[RSTChris]

Also interested in the carbs, have they been fitted/ran with?

thanks

[GDN16v]

is the rear strut a weld in/bolt in type that fixes onto the rear arches?or does it bolt onto the top of the rear shockers?

Bolts in between the rear turrets


hi have you got pictures of the front and rear strut brace ?

All pics will be added later!:thumb:


Im after the header tank and everything to convert the rear of my nova for 5 stud, how much mate

cheers

Header tank and rear 5 stud hubs will be £140:thumb:


also any pictures of the seats?are they are the ones with the big head restriants?

Yes they are the ones with the head restraints, pics later:thumb:


Also interested in the carbs, have they been fitted/ran with?

thanks

Never been fitted or ran, but were working fine before they were removed from the bike engine!:thumb:

[Adam]

Kawasaki 1100 Bike Carbs (jetted for an XE), with management, distributor, NEW FACET Fuel Pump, 10mm Inlet Manifold Gasket - £300



With MANAGEMENT(i.e. mbe)? Or just a old carb dizzy/coil?

[GDN16v]

Mono Apache Wheel and Boss - £60
http://i170.photobucket.com/albums/u241/a16vnv/Picture333.jpg

Corsa B Lower Strut Brace - £30
http://i170.photobucket.com/albums/u241/a16vnv/Picture337.jpg





BRAND NEW Genuine Vauxhall Nova E16SE (GTE) Water Pump - £20
http://i170.photobucket.com/albums/u241/a16vnv/Picture347.jpg

Kawasaki 1100 Bike Carbs (jetted for an XE), distributor, NEW FACET Fuel Pump, 10mm Inlet Manifold Gasket - £300


http://i170.photobucket.com/albums/u241/a16vnv/Picture376.jpg

http://i170.photobucket.com/albums/u241/a16vnv/Picture375.jpg

Rear Callipers (Painted Arden Blue) + new pads and spring clips, 35 - £25

BRAND NEW Genuine Vauxhall Alternators - £30 each

Z18XE (1800 small block) Crank, came from a 34,000 mile engine - £60
http://i170.photobucket.com/albums/u241/a16vnv/Picture351.jpg

Z18XE sump - £30

Bailey Header Tank - £90

Bailey NEW Breather Tank (side pipe has been cut back 8mm), with filter - £80

http://i170.photobucket.com/albums/u241/a16vnv/Picture381.jpg

BRAND NEW Cavalier Rear -60mm Springs - £45

BRAND NEW FK Coilovers + rear shocks (not pictured), but no rear springs - £250

E16SE MEGA LEADS - £10

5 stud Nova/Corsa Hub Conversion (matchined to fit nova corsa hubs) - £60

http://i170.photobucket.com/albums/u241/a16vnv/Picture396.jpg

5 Stud Rear Sealed Rear Hubs to match the fronts for a rear disc conversion - £50

http://i170.photobucket.com/albums/u241/a16vnv/Picture397.jpg

CORSA GSI FRONT BUMPER (no fogs) - £70 (back up for sale due to timewaster)!

4 New Arch TRims - £50

Corsa B (2) rear bumper - £40

[RSTChris]

Whats the rear disc setup come with mate

[hybridturbo]

pm'd

[Nick J]

Pm'd on jov regarding wings fella.

[bola]

what fk coilies are they mate?

[ste porter]

pm me a price for the servo delivered aswell as paypal details if you will post it mate

[GDN16v]

pm me a price for the servo delivered aswell as paypal details if you will post it mate
Provisionally sold matey but you can have first refusal is it doesnt!;)

New pics being added!!

[turbo-boy]

how much for the exhaust manifold on its own?

[GDN16v]

pm's replied to!!;)

List updated!

[MAYES MOTORSPORT]

pm's replied to!!;)

List updated!

YHPM:)

[GDN16v]

List updated and new pics added:thumb:;)

[RSTChris]

Whats the rear disc setup come with mate

btt

[GDN16v]

Whats the rear disc setup come with mate

Not so much a rear discs set up, its the 5 stud hubs to use in the conversion. You'll need the conversion plates and the callipers to match, and the rear discs have now been sold!;)

[RSTChris]

So just Cav V6 then

[GDN16v]

So just Cav V6 thenYip;)

[Benn]

Cavalier Turbo Black Diamond Front Discs, drilled and grooved (used) - £30

Guessing deilevery will be huge on them?

[Mike]

Cavalier Turbo Black Diamond Front Discs, drilled and grooved (used) - £30

Guessing deilevery will be huge on them?

They cost about as much to post as an 8v head (about £18 IIRC)

[Benn]

Hhmm thats not bad,

[Mike]

Hhmm thats not bad,

5-7 working day parcel post, a very overlooked service :thumb:

[darcy]

ill have the clutch and flywheel off u mate, pm'd

[Mike]

Engine C16SE, lowered compression for the turbo conversion - £100?

Spec on this please chap.

[GDN16v]

List updated, pm's sent!:wtf::thumb:lol

[Adam]

Sorry to go off topic but you can post a 8v head for about 7quid with parcel to go/dhl.
Ive posted an entire top end for £7 with them lol

As long as its under 25kg.

Royal mail is a mega expensive service for items with a bit of weight in them.

[GDN16v]

Sorry to go off topic but you can post a 8v head for about 7quid with parcel to go/dhl.
Ive posted an entire top end for £7 with them lol

As long as its under 25kg.

Royal mail is a mega expensive service for items with a bit of weight in them.

Cheers, was gonna put that up myself!:thumb:

[General Baxter]

price posted on the block, lol

[turbo-boy]

is there lower compression pistons in the engine or to head gaskets and a spacer plate?

[darcy]

hi can you get back to me about the clutch/flywheel please mate 07845622643 cheers
alex

[GDN16v]

is there lower compression pistons in the engine or to head gaskets and a spacer plate?
2 head gaskets and a spacer plate!!!;)

List updated!!:thumb:

[Rexy]

can i have your Phone number please As per PM?

[GDN16v]

hi can you get back to me about the clutch/flywheel please mate cheers
alex

Replied!!:thumb:


can i have your Phone number please As per PM?

Replied!!:thumb:

[tom_beverley]

Any gen on that alternator [ampage/part no.] yet matey?

[GDN16v]

Any gen on that alternator [ampage/part no.] yet matey?

Pm'd mate!:thumb::)

[hybridturbo]

pm'd

[GDN16v]

pm'd

Replied mate!:thumb:

[GDN16v]

does the bailey breather tank fit in nova gsi

It wont fit in with a gsi filter / air flow meter in place!:(

[cooltom31]

pm'd

[bola]

what fk coilies are they?

[cooltom31]

?

[General Baxter]

price posted on the block, lol

ello :thumb:

[GDN16v]

ello :thumb:

Sorry i thought you were joking!!

Probably be about £70 depending on wether some one will collect it ok!

[cooltom31]

pm'd

[RSTChris]

Im after the front and rear 5 stud hubs, do you have the piece needed to weld onto the nova rear beam also?

Im also interested in the front wings, do they require paint?

cheers

[GDN16v]

Im after the front and rear 5 stud hubs, do you have the piece needed to weld onto the nova rear beam also?

Im also interested in the front wings, do they require paint?

cheers

Wings will require painting to match youre car!!

The rear plates can be bought for about £25 from most vauxhall tuners e'g LMF etc!

[Rick Draper]

I will take the CV joints, pm me with payment details. Also is the F28 still available?

[GDN16v]

I will take the CV joints, pm me with payment details. Also is the F28 still available?

Ok. I'll pm you tomorrow morning as im going out now!!

F28 is provisionally sold!

Cheers:thumb:

[ste porter]

gearbox?

[RSTChris]

What colour are the wings tho? My cars polar white...

So how much posted on the f+r hubs

[Shaun]

CORSA GSI FRONT BUMPER (no fogs) - £70

any pics mate?

also interested in lower strut for corsa aswell mate

[Rick Draper]

Ok. I'll pm you tomorrow morning as im going out now!!

F28 is provisionally sold!

Cheers:thumb:

Ok, if the gearbox sale falls through i will take it.

[cooltom31]

im still interested in the coilovers if you could reply to my pm thanks.

tom

[GDN16v]

Ok, if the gearbox sale falls through i will take it.
Ok i'll put youre name down for 1st refusal!


gearbox? Provisionally sold!


What colour are the wings tho? My cars polar white...

So how much posted on the f+r hubs

Theyre glacier white!:thumb:

£120 delivered on the hubs!;)


CORSA GSI FRONT BUMPER (no fogs) - £70

any pics mate?

also interested in lower strut for corsa aswell mate
Pic below of the bumper!! Collection only for the bumper!:thumb:

http://i170.photobucket.com/albums/u241/a16vnv/Picture409.jpg


im still interested in the coilovers if you could reply to my pm thanks.

tom
Provisionally sold!

[Shaun]

are the clips ok on the bumper??

would you post if i arranged courier mate??

just that your opposite end of the country lol

[tom_beverley]

Did you manage to get the part number for that alternator dude?

[GDN16v]

are the clips ok on the bumper??

would you post if i arranged courier mate??

just that your opposite end of the country lol

I think they are! I can check for you and back to you!!

Yeah that'll be fine about the courier!! :thumb:

[Shaun]

whats best price on the bumper and lower strut brace then mate??
and i will arrange courier if you can wrap it for me then.
Shaun

[Shaun]

also interested in the turbo manifold etc. whats best price on that aswell mate.
will convert it to work with c16xe then :)

[GDN16v]

Did you manage to get the part number for that alternator dude?
Sorry thought i had replied:(

Checked the alternator:

Delco Remy

R - 1030051

3493771

549076

Hope that helps!:thumb:


whats best price on the bumper and lower strut brace then mate??
and i will arrange courier if you can wrap it for me then.

also interested in the turbo manifold etc. whats best price on that aswell mate.
will convert it to work with c16xe then :)

£100 for the bumper and strut brace and i'll wrap them for free for you!!

Best price on the turbo and manifold would be £350 + £25 delivery due to size and weight!

[Shaun]

90quid on strut brace and bumper mate?

how u want paying buddy? ;)

[GDN16v]

90quid on strut brace and bumper mate?

how u want paying buddy? ;)

pm'd!!:thumb:

[C-R-A-I-G]

Hi mate,
Very intrested in the Engine.What sort of work has been done to it i.e Rebuild and how long ago was that?Also is there any leaks,rattles,does it smoke etc?
Does it come with everything to fit?
I have Cash waiting and can come and pick it up!!

Please get back to me.I think i sent you a Private Message so if you could get back in touch that way it would be better.

Thanks
Craig

[white2lSR]

dont suppose you have a lock set using one key?

[GDN16v]

dont suppose you have a lock set using one key?

Sorry i dont!!

[C-R-A-I-G]

PM Sent!

Craig

[causerino]

You have a PM!

[GDN16v]

PM Sent!

Craig


You have a PM!

Pm'd back!:thumb:

[C-R-A-I-G]

Your Inbox is full so i cant Pm you back!

Will you post the Engine?At my Expense?Or if not could you put it on a pallet and wrap it up for me and i will arrange my own Delivery?If so then i will buy this off you ASAP as i am Very Intrested!

Craig

[worst-son]

as said in emails, i have money and courier waiting so pm me ur postcode and how u want payment!!

thanks ash

[GDN16v]

Your Inbox is full so i cant Pm you back!


Craig


i have money and courier waiting so pm me ur postcode and how u want payment!!

thanks ash

Sorry for the full inbox!:(

Pms replied to!! :thumb:

[dion r m8]

hiya what exhaust manifold woz used for the turbo conversion ? where can i get 1 from and how much cheers