PDA

View Full Version : 1.4 and 1.6 xe



aaronc190
12-09-08, 09:15 PM
would a 1.4 g-box from an astra fit a 1.6 vectra
and would the 1.4 loom and ecu be any good on the 1.6??:confused:

aaronc190
13-09-08, 10:15 AM
does anyone no anything?

MC
13-09-08, 10:45 AM
Yes gearbox will fit.

Loom may fit if you play around with swapping stuff over.

ECU is mapped to run a 1600, not a 1400.

ck
13-09-08, 10:46 AM
yes all the small block gearbox's will be a direct swap (except for older nova's as the f10's have a smaller bell housing)

the 16xe will run fine on the 14xe ecu and loom but you wont get the full potential out of the engine, will run fine just have a few flat spots here and there, and a little sluggish at high revs. but it works fine lol

aaronc190
13-09-08, 07:11 PM
ok thanks :)

aaronc190
13-09-08, 08:37 PM
forgot to ask would the 14xe loom affect power?

Rich
13-09-08, 08:44 PM
ck just answered yes to that but will affect power..

aaronc190
13-09-08, 09:05 PM
how would a loom affect power? is it not just a bunch of wires?

brainsnova
13-09-08, 09:06 PM
it would affect fuel delivery if the ecu thinks its a 1.4

Rich
13-09-08, 10:01 PM
I dont know what sensors etc differ between the engines, but if your plugging a 1400 ecu and loom into a 1.6 the readings etc are going to differ to what they should, why not just stick with a 1400 or 1600?