c20xe water pump

[BIGS]

As some of you might know im putting the rad in the boot, so i want to know will a standard water pump be man enough to push the water through or will i need a aftermarket one? If so where can i buy one

Cheers

[Adam]

You could use an electronic pump

[burgo]

try pm'ing austin. see if he used an electric pump or not

[BIGS]

ah yea of course i didnt even think of austin, cheers

and if i used a electric pump would i fit it near the rad or engine still?

[burgo]

id fit it after the rad. so that the engine pumps it back to the rad and the electric pump pumps it back forward

[BIGS]

oh yea i see so still use the one on the engine then a electric one after the rad.

[burgo]

thats how i would do it.

[BIGS]

would this one be good?

http://cgi.ebay.co.uk/Formula-Ford-Race-car-Kit-car-New-Electric-Water-Pump_W0QQitemZ330269659443QQcmdZViewItem?hash=item 330269659443&_trkparms=72%3A12%7C39%3A1%7C66%3A2%7C65%3A12%7C24 0%3A1318&_trksid=p3286.c0.m14

[burgo]

looks pukka to me and a bargain

[BIGS]

ok ideal thanks bud, +rep :thumb:

[craig green]

Thats a Davies Craig pump. Good stuff.

[BIGS]

oh you know of the make then, are they a expensive pump normally? dont know how much to bid up to lol

[burgo]

http://www.demon-tweeks.co.uk/products/ProductDetail.asp?cls=MSPORT&pcode=DCP8005

[BIGS]

http://www.demon-tweeks.co.uk/products/ProductDetail.asp?cls=MSPORT&pcode=DCP8005

:thumb:

[ck]

Davies craig pump are very good and defo remove the old pump. you'd be wanting to use th ehigher capacity pump to beb on the safe side due to the longer hose runs.

the pumps are cheap, its the Controller for th epump that is not as cheap. you want the better controller aswell tho to be honest lol. when i was looking into it fo rmy 13b rx7 rotary engine it was going to cost over £200 for the standard size pump and controller.