View Full Version : Rocker Cover Painting?
poultergeist
26-08-08, 08:01 PM
what is the best way to prep and paint my xe rocker cover?
nitromors,sanding,or just painting over it how it is?
is rattle can paint ok too?
Pistol Pete
26-08-08, 08:12 PM
Sand back the original paint, starting rough then smooth. Primer, sanding back between 2 or 3 coats then colour top coat. Maybe some laquer. Yeah rattle cans should be fine. Just allow it to dry properly between coats.
Hope that helps!
poultergeist
27-08-08, 05:18 PM
is it the same procedure for the plug cover?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.