novacabrio
15-08-08, 10:29 PM
Interest check first to see if its worth me buying this stuff in large bulk before I do!
I've found a supplier that can do a very close match to the GSI boot vinal. It is textured but it the texture is not as rough as the regular black board stuff people have used in the past (I can supplier a sample if needed, although it doesnt show it to its best quality). I have already fitted a trial peice to Riggys car to see how it looks, and it came up spot on. I was 100% happy with it, I think Riggy was aswell?
Info can be found here on Riggys
http://www.pngclub.com/forum/showthread.php?t=86774&page=39
http://img.photobucket.com/albums/v13/riggy4/Image666.jpg
better pics are available if Riggy can take them?
I can supply this in various styles
material cut slightly bigger than size, you'll need to cut the straight edge £35
Material with edge cut ready to fit, will need trimmed around the edges that folds over £45
Supplied and fitted (Newcastle upon Tyne) £75 (although I accept no responcablity if it goes wrong when fitted! I would supply a replacement at a discounted price and fit it at the same time)
This can be fitted by almost anyone. All you would need is a hair dryer/heat gun. A sharp knife/stanley knife, Pin, warm soapy water, filler spreader/bodge spreader, patients! And the tools to remoce the boot handle.
I intend to fit one to my wifes car next week so I'll try and do a How to guide to go with each sheat of vinal.
Any feedback from people who have seen Riggys over the last week and who in the past have also seen a genuine one please feel to let me know your thoughts........
I've found a supplier that can do a very close match to the GSI boot vinal. It is textured but it the texture is not as rough as the regular black board stuff people have used in the past (I can supplier a sample if needed, although it doesnt show it to its best quality). I have already fitted a trial peice to Riggys car to see how it looks, and it came up spot on. I was 100% happy with it, I think Riggy was aswell?
Info can be found here on Riggys
http://www.pngclub.com/forum/showthread.php?t=86774&page=39
http://img.photobucket.com/albums/v13/riggy4/Image666.jpg
better pics are available if Riggy can take them?
I can supply this in various styles
material cut slightly bigger than size, you'll need to cut the straight edge £35
Material with edge cut ready to fit, will need trimmed around the edges that folds over £45
Supplied and fitted (Newcastle upon Tyne) £75 (although I accept no responcablity if it goes wrong when fitted! I would supply a replacement at a discounted price and fit it at the same time)
This can be fitted by almost anyone. All you would need is a hair dryer/heat gun. A sharp knife/stanley knife, Pin, warm soapy water, filler spreader/bodge spreader, patients! And the tools to remoce the boot handle.
I intend to fit one to my wifes car next week so I'll try and do a How to guide to go with each sheat of vinal.
Any feedback from people who have seen Riggys over the last week and who in the past have also seen a genuine one please feel to let me know your thoughts........