View Full Version : Side Repeaters
thedjse
11-08-08, 01:30 PM
Hi guys do these fit the nova mk1? and are they easy to fit?
http://www.corsacentre.com/Nova%20corsa%20vauxhall%20parts/Detail.asp?PID=1799&CatID=5&CarID=1
Please don't. My hand probably fits in the toaster but that's not good cause to try it.
thedjse
11-08-08, 01:48 PM
haha the originals look soooo gay tho lol
Then get clear looking originals dude.
Personally I prefer the std fanta bottle tops :)
Probably need some tangs cutting off the back.
I would suggest Astra mk4, Pug 106 or Alfa side repeaters instead.
craig green
11-08-08, 05:15 PM
Personally I prefer the std fanta bottle tops :)
And I thought they were boiled sweets!
Never made the boiled sweet reference before mate lol
Fanta tops actually fit and still shine through to a degree
rednova
11-08-08, 05:38 PM
Fanta tops actually fit and still shine through to a degree
hmmmm i sense some bottletops going on for a laugh!!!
diet coke anyone :thumb:
NovaBoi92
11-08-08, 05:38 PM
im pretty sure u have to cut the wire off the old one and wire it back up to the new one
NovaLad
11-08-08, 05:46 PM
In answer to ya question alex.
Yes they will fit.
Allthough you will have to cut the clips off the back and file down any excess plastic so theysit flush against ya wing.
You will then most likely have to sticky pad them on or bond them on.
Just snip the old wires and re connect the new ones that's what i did.
thedjse
11-08-08, 06:23 PM
Thanks mate much apprciated
hmmmm i sense some bottletops going on for a laugh!!!
diet coke anyone :thumb:
LOL they're the closest you'll get to clears lol
Do it and take a pic mate
novacabrio
12-08-08, 12:50 AM
I'm toying with Astra mk5 at the moment I think they'll suit the square nova lines well. Also found on Corsa Dshttp://i304.photobucket.com/albums/nn174/andyvxr/Picture002.jpg
rednova
12-08-08, 05:07 PM
nah they dont look right - theyre recessed in iirc so you'll need to cut the section from the astra wing and weld it in
astra mk4 ftw
loggyboy
12-08-08, 05:46 PM
Get on ebay and my some universal oval ones. they will have simple circular mounts and will have sticky pads and fix straight to the car with no mods to either wing or light.
brainsnova
12-08-08, 05:50 PM
i used to always cut the wing so it had the early corsa holes that way they unclip etc for replacing bulbs
i have some clear astra mk4 ones f/s if you want them mate.
thedjse
13-08-08, 06:51 PM
How much?
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.