View Full Version : Do any XE looms have the car loom plug INSIDE the footwell
As above.
The loom i have seems to have the ecu loom to car loom plug in the engine bay, like a nova gsi/gte.
Do any have the plugs inside the car footwell, with the main ecu plug?
As that would make it much easier for me, as i can just make it plug and play, instead of running wires all around the engine bay into the car.
Its a 92/93 DIZZY engine
Sounds like you have an Astra GTE loom for some reason as that has a plug like the Nova GSi and the fuel pump relay near the amplifier plug. All the other looms have the plugs in the footwell from what i've seen.
Would it not be easier to mod it ad? i have a late dis loom and mine is inside the car. I had to move the bulkhead bung down the loom a bit, to make it "comfy".
Aye, i think its a GTE loom Lee.
Must have been swapped at sometime, as it looks like a non-lambda loom as i cant find a lambda plug.
The ecu code is "GY"
The ignition live is black/yellow too(which is a Astra GTE loom "thing")
John, could do but i think i'll just get one with the plugs in the footwell TBH
Neater imo
Philsutton
02-08-08, 07:58 PM
GTE looms are gay, everything important is right near the coil.
You can use a different loom, but you will need a different ecu an possibly a Lambda as well.
Only thing you'll have to watch is most other looms have lambda and fuel tank vent valve connections and may show an ECU light if you don't have the sensors to plug in?
I'll fit a lambda and tank vent valve too then :D
Or may find everything needed for a dispak conversion...
Looked at that for a mate, worked out it would be cheaper to sell the dizzy engine and find a dispack one as you need so much stuff.
Lol
Dizzy ecu and loom it is then.
mikey14sr
03-08-08, 09:57 AM
http://www.justopelvauxhall.com/showthread.php?t=6386
http://www.justopelvauxhall.com/showthread.php?t=6383
you know it makes sense mate!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.