MOTORbike

[large_steve182]

this was by brothers and i;s project. that didnt really work out to well

first of collected a gx160 engine from a field and a crappy mountain bike from the scrappy.
http://file035b.bebo.com/1/large/2007/10/08/17/14742100a5768149169l.jpg

then the idea in mind roughly
http://file035b.bebo.com/1/large/2007/10/08/17/14742100a5768149596l.jpg

some redesigning

http://www.bebo.com/PhotoAlbumBig.jsp?MemberId=14742100&PhotoId=5768150900&PhotoAlbumId=5768110199http://file035b.bebo.com/1/large/2007/10/08/17/14742100a5768150373l.jpg

engine fitting

http://www.bebo.com/PhotoAlbumBig.jsp?MemberId=14742100&PhotoId=5768150373&PhotoAlbumId=5768110199http://file035b.bebo.com/1/large/2007/10/08/17/14742100a5768149596l.jpg

upon completetion :)

http://file035b.bebo.com/1/large/2007/10/08/17/14742100a5768150900l.jpg

got it working through an elaborate design of chain rings of mountain bikes and spacing. but without the idea of a clutch couldnt ride it with a person on it

[twistysnovagte]

yes i like,does it go?
we used to make tandems and all kinds similer to what tyouve made when we were kids and used to be a right laugh(especially three of us on this huge tandemlol.

[large_steve182]

we had it going upside down. with wheel off the floor. but needs a centrifugal clutch really and were all skint. we were pushing my brother down the road on it and trying to pull start it. all that resulted in was by brother almost coming off and leaving a lil scratch in his civic

[twistysnovagte]

we used to plumb rev cable of the quads(the under bar thumb one) the engine and all fine until you had to stop at 20/30mph in the streetlol,the good old days.we never used geared engine just rev and rips and they do the trick just as good:)

[rednova]

nowadays you'll get done by the old jobsworth fuzz same as mini motos etc

well done though reminds me of jeremy clarksons motorworld from india or cuba or some dodgy country like that