lots of spares i have LOOK

[pul16v]

hey im getin near the end of my nova project now and all my spares have to go go heres what i have


all item still available




ohc rocker cover with metal filler cap polished but been on my garrage wall for last 3 years good goin over with autosol would do it wonders
http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs002.jpg
£5

f13 gearbox came from gte dont know if its c/r or not can find out with gearbox mount and linkage
http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs003.jpg
£30



2.0 xe v belt pulley good conditon can cut down to single v for extra ££
http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs005.jpg (http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs005.jpg)
£10 prov sold


nova carb tank see pictures as to its fit
http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs006.jpg (http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs006.jpg)
http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs007.jpg (http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs007.jpg)
£25

mk3 astra gear selector +rod
http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs008.jpg (http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs008.jpg)
£10

nova behind bulkhead heater cover x2
http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs009.jpg (http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs009.jpg)
£2.50


sri/gsi spolier no bolts so glue on only
http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs010.jpg (http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs010.jpg)
also one with bolts with small dammage on top ( unpictured )
£10

box of various spares , bolts mirrors alltypes of covers and clips , ( ASK )
http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs011.jpg (http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs011.jpg)
£????


gte seats been in workshop years will need a very good clean dammage to bolster can be seen
http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs012.jpg (http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs012.jpg)
£15



gsi drivers lower shelf good con
http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs014.jpg (http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs014.jpg)
£5


rear tailgate cover good may even have clips
http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs015.jpg (http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs015.jpg)
£3

3 rear arch carpets 1 set and 1 drivers side
http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs016.jpg (http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs016.jpg)
£10 for set £5 for the single



corssa gsi sump with new gasket
http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs018.jpg (http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novafs018.jpg)
£35 gasket cost over £6



nova front corner ( drivers) (gm)
http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novapanels001.jpg (http://s88.photobucket.com/albums/k170/slingshotturbo/?action=view&current=novapanels001.jpg)
£25

sorry all items plus postage
please dont hestitate to ask any questions

also im willing to swap any of these parts for a good fuel injection tank
phil

[jord4n]

where are you, plus i have a good rack too

[pul16v]

oooppps forgetin all the important bits lol im in wakefield near leeds junction 41 off m1

phil

[novait]

where are you? may have a crossmember off you.

[pul16v]

wakefield your welcome to pick up but your miles away . last time i posted one it cost £11 pounds i think ??


where are you? may have a crossmember off you.

[jord4n]

if the f13 is cr ill do a swap for a rack off a 60k car

[pul16v]

il find out tonight for ya where abouts are you ?


if the f13 is cr ill do a swap for a rack off a 60k car

[Adam]

How much to cut the double V pully down to Single(doing it properly or using a grinder? lol)

Price posted?

[jord4n]

im in hull, would think meeting half way somewhere on the m62 would be good.

[pul16v]

gearbox is wide ratio still interested jord4n????

[jord4n]

im sorry only after a cr box

[pul16v]

im sorry only after a cr box

no problem suspected you was


How much to cut the double V pully down to Single(doing it properly or using a grinder? lol)

Price posted?

would be done in a lathe by the engineer at work said hed do it for £10 in his lunch break for me but my plans changed so never had it done not a clue what price would be for postage it weights quite abit at mo dunno bout after its been changed

phil

[AlexW]

Do the front cross memeber actualy include the cross memeber? Or is it just the front valance?

[pul16v]

front vallance and crossmember spot welded together is what youl get i also have just the crossmember without vallance if some1 wants one
all gm aswell

phil

[Benn]

How much would postage be on the front wing?
Are there any dents for rolling the arch?

[pul16v]

How much would postage be on the front wing?
Are there any dents for rolling the arch?

il find out a price for ya and no theres no dints at all and the lip has been sealed so no future rust issues

[AlexW]

If you still have the front cross memeber with reinforcement nextweekend il have it off you, providing you will post.

[pul16v]

i have two so should atleast have 1 left . what you mean by reinforcement anyway?? its crossmember and frontvallance the part youl get


If you still have the front cross memeber with reinforcement nextweekend il have it off you, providing you will post.

[Lee H]

I have a reconditioned steering rack thats only done a few hundred miles but have removed the track rods to fit on my quick rack. Would swap for a front crossmember?

[AlexW]

Some people/places call the crossmember, reinforcement.

[liftoffoversteer]

PM sent

[pul16v]

replied

[tom_beverley]

Interested in Astra selector - I assume this is the internal one? [I can't see the pics at work :(]

What is the condition of the linkages - ie no excessive play?

I can collect, but will be 10/11th August as I'm in Leeds for a training course.

[pul16v]

yes its the internal one bud

as far as i can remember its in good condition came from an 80tho 1.4 tht i scraped took it out for my project and settled for the std one
you can pick up on that date if you like yes

phil

[AlanH]

any pics of xe flat flywheel and could you price postage please? cheers

[pul16v]

erm yea its on the first page ?? can see postage being quite high for it but il get a price may be supprised lol

[pul16v]

bttt

open to decent offers, just want it gone

[mowgli]

I'm interested in the gbox & seats. are they still available??

[pul16v]

yes they are matey pm me about them if serious

phil

[Thundersmurf]

I'm interested in the spolier and the rocker cover.... I'm in manc so it's not too far, or do you think it would be easier to post?

[pul16v]

you have pm

[pul16v]

ttt

[raymond]

i do still want the wing mate ive just no time to get over there and im on my hols soon for 3 week you ok to hold it for me mate or do yo want rid asap

[Nick J]

You have pm.

[iluvnovas_02]

hi mate im interested in the box is it still for sale

[daz42]

you have pm

[pul16v]

i do still want the wing mate ive just no time to get over there and im on my hols soon for 3 week you ok to hold it for me mate or do yo want rid asap

aslong as your going to actaully buy it im willing to hold it for you yes

phil

[poultergeist]

did you find out a price for the flywheel posted?

[pul16v]

sorry i totaly forgot you had asked il get it asap


did you find out a price for the flywheel posted?

[novait]

have you still got a crossmember? im in need of one and i carnt find one any where... would you be willing to post???

[pul16v]

ttt

[pul16v]

back ttt:thumb:

[pul16v]

no one buying ???

[AlanH]

price on postage for flywheel? i know it'll be more than the price of the flywheel but need one

[Lee H]

I have a reconditioned steering rack thats only done a few hundred miles but have removed the track rods to fit on my quick rack. Would swap for a front crossmember?

Are you not interested in this offer, cash your way too maybe?

[pul16v]

price on postage for flywheel? i know it'll be more than the price of the flywheel but need one

flywheel now provisonaly sold to a mate sorry


Are you not interested in this offer, cash your way too maybe?

ive now got a recon rack only cost £15 too lol but crossmembers still available before they go on ebay soon

phil

[leethomp]

Hello mate, could do with the wheels, Let me know on lee.thompson256@virgin.net
Thanks
Lee

[pul16v]

back to the top again

[pul16v]

top

[pul16v]

topsy

[Crayon]

Hi m8 interested in the
behind bulkhead heater cover and the rear tailgate cover how much posted to Swansea m8 also interested in the 1.2 tail gate but cant collect it, is there only one color red on the 1.2??????

[pul16v]

ttt

[bmw156]

hey, interested in the boot arch carpets, have sent you a pm

[Crayon]

replyed and pm`d no reply?????????

[pul16v]

replyed and pm`d no reply?????????


you have now! please be patient im not sat waiting upon pm's and replys to this thread ;)

[let_nova]

you still got the v pulley? thanks

[craighawkins]

got any spare miami blue paint????