mk2 dash

[Huffy]

im changing my mk1 dash for a mk2 do i need to change the heater matrix also are there any other bits id have to change ive got pipes for the blowers glove box, centre con cheers huffy:thumb:

[Jack]

See my guide in articles.

You can use the Mk1 heater matrix, but you'll need to cut the blanks out the side (if they're not already open) to fit the side vent ducting.

You also need all the Mk2 switch plugs as the Mk1 plugs are different.

[AlexW]

And if its a 1.2 or another simple electric engine i would susgesting getting the whole loom. Makes it so much easyer.

[Jack]

Shouldn't need to get the whole loom for a dash swap, as the wiring is all the same between all the models (to a certain degree), just the plugs differ.

[Huffy]

my cars a 1.3 same engine as the 1.3sr cheers ill take a look at you guide now:thumb:

[Vaux.Boi]

You will need all the Mk2 switch/plugs as the Mk1 plugs are different