Which Coilover Springs

[Will F]

I have a set of Leda coilovers and have no idea what poundage springs are on them..

I am going to buy some new ones from Merlin (etc) and am going for the 350 lb ones...

I am assuming I need the 1.9" versions?

[craig green]

The measurement is for the ID (inside dia).

[Andy_L]

350lb springs??

A bit excessive I'd have thought, or have you had this poundage before and it suite your driving style?

[Rick Draper]

1.9" is generally the size thats used on the rear of a nova. 2.25" is usually the standard size but iirc ledas are generally 2.5" but i will measure mine later if you want?

[Rick Draper]

O and i might even have some 350lb springs if you are interested?

[craig green]

350lb springs??

A bit excessive I'd have thought, or have you had this poundage before and it suite your driving style?

For a track car/good surface a higher spring rate is OK.

[Will F]

O and i might even have some 350lb springs if you are interested?

PM me dude.

I am guessing that all Ledas are the same. (2.5")

Cheers

[Andy_L]

For a track car/good surface a higher spring rate is OK.

I just though around 273-300 was what most people were running for their track cars?

[Stuart]

depends on what you like really.... some might run seemingly silly high rates, and others might run very soft.

[Rick Draper]

Will the spare ones i have are 6" long 65mm id and 325lb.

[Will F]

Will they fit then? lol

If so, how many pennies?

[craig green]

65mm is just over 2.5" Will.