PDA

View Full Version : GTE/GSi brakes



ade
23-06-08, 11:36 PM
These are the only bits I need...

Standard GSi/GTE brake calipers and carriers (although not necessary).

Anyone got any?

Ade

Steve
24-06-08, 12:03 AM
Crap, I just gave away my old gte brakes.. you not going for the 16v ATE setup instead?

Cheeze
24-06-08, 07:24 AM
i have a set of calipers mate, from a gsi
if you want them

gsi 2.5 flann
24-06-08, 10:26 PM
you be better going for the 256mm 16v brakes. wot size well you running your nova on

novashed
25-06-08, 06:58 PM
ive got a set of 1000 mil discs and pds and calipers off my calibra 256mm vented £55 posted

ade
25-06-08, 09:09 PM
Its on 14's at the moment and staying that way so ATE's wpont fit.

Cheeze - pm sent!

AlexW
25-06-08, 09:56 PM
Its on 14's at the moment and staying that way so ATE's wpont fit.

Cheeze - pm sent!

ATE's will fit, just need a bit of modifing. See my project.

novashed
26-06-08, 11:09 AM
ive used ates with 14's beforte only rim that had issues was gsi/gte but a bit off the caliper and cleared.

Matt2107
26-06-08, 09:40 PM
Ade I've got a pair of standard calipers painted silver if your interested.
They were brand spankers and have only done 40 miles.

Also got some red dot discs and pads to go with again only done 40 miles.

Nova Full
03-07-08, 07:55 AM
Maybe something to consider but late GSI's had better brake than GTE's

ck
03-07-08, 07:32 PM
256mm ATE's will fit under 14's which are 5-1/2nch wide (5inch wide wont fit unless you grind a small amount off the edge of the caliper)

i have a few set ups here, corsa gsi brakes, they are 256mm but use a thinner discs and smaller caliper (better suited to the std master cylinder) or some corsa sport ones which are the same as the gsi ones but are 236mm. these are the same style as ATE calipers (could even be ATE) and not like the old nova ones..