Replica GTE/GSI boot vynal/vinal

[novacabrio]

Interest check first to see if its worth me buying this stuff in large bulk before I do!

I've found a supplier that can do a very close match to the GSI boot vinal. It is textured but it the texture is not as rough as the regular black board stuff people have used in the past (I can supplier a sample if needed, although it doesnt show it to its best quality). I have already fitted a trial peice to Riggys car to see how it looks, and it came up spot on. I was 100% happy with it, I think Riggy was aswell?

Info can be found here on Riggys

http://www.pngclub.com/forum/showthr...=86774&page=39



better pics are available if Riggy can take them?

I can supply this in various styles

material cut slightly bigger than size, you'll need to cut the straight edge £35

Material with edge cut ready to fit, will need trimmed around the edges that folds over £45

Supplied and fitted (Newcastle upon Tyne) £75 (although I accept no responcablity if it goes wrong when fitted! I would supply a replacement at a discounted price and fit it at the same time)

This can be fitted by almost anyone. All you would need is a hair dryer/heat gun. A sharp knife/stanley knife, Pin, warm soapy water, filler spreader/bodge spreader, patients! And the tools to remoce the boot handle.

I intend to fit one to my wifes car next week so I'll try and do a How to guide to go with each sheat of vinal.

Any feedback from people who have seen Riggys over the last week and who in the past have also seen a genuine one please feel to let me know your thoughts........

[wilson_sri]

Im VERY interested Mark. Would want it trimmed for the edge.

Will you be able to get b pillar vinyl aswell?

[wilson_sri]

Also can you get the GSI badge sticker made up?

[AlexW]

Do you belive there is any chance that the "Pre Cut to fit" one is too small? Just asking.

[novacabrio]

Im VERY interested Mark. Would want it trimmed for the edge.

Will you be able to get b pillar vinyl aswell?

The boot is less textured than the B pillar So it wouldn't be right. As for the GSi decal I've already sourced a supplier for to do these, search ASWRALLY on here I spent a while with him via email getting the stickers almost perfect

[novacabrio]

Do you belive there is any chance that the "Pre Cut to fit" one is too small? Just asking.

How do you meen? I would make sure that the sticker is right on my boot before sending them? I managed with Riggys? It would still be just a little bit bigger to allow for error and trimming

[Huffy]

hello mate im after the gte or gsi boot vinyl and the pillars can you get them mate i dont need them with the gsi or gte logo on just plain black is fine heres my email huffy_a_1@hotmail.co.uk

cheers mate

[Riggy]

really is a spot on match , anyone welcome to nosy at mine at national weekend

[crazy_al]

i'll take 1 with a straight cut edge m8

crazy_al_bal@yahoo.co.uk

email me with payment details cheers

[novacabrio]

I wont be doing the door decals