Results 1 to 7 of 7

Thread: compressor

  1. #1
    Senior Member
    Join Date
    Oct 2001
    Location
    Great Yarmouth
    Posts
    839
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default compressor

    I wnat to buy a compressor for spraying with but I want to know what would be the best to buy?

    thanks


    IF IT'S STANDARD, CHANGE IT!

  2. #2
    Club Member ade's Avatar
    Join Date
    Mar 2002
    Location
    Glasgow Wears:A Skirt
    Posts
    10,822
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default RE: compressor

    depends on how much you've got to spend - you can get loads - (B&Q good place - the warehouses) - divilbiss (spelling?) make a good one but its the compressor you need to look at - need something with a bit of kick to it. I think 5hp or more is about ok for home use - most paint shops use between 5 and 10 hp (different paint types though). I got one for ?100 including compressor, spray gun, tyre inflator, dust blaster and flexi hose (5hp made by performance power - oil free compressor runs of mains) - 3 yr guarantee, you get the full kit including 1 ltr paint can spray gun(screw locking sealed type) with snap on connectors - its a cracker for the price and sprays very well! (B&Q)
    Ade :D

    I'd rather have a bottle in front of me than a frontal labotamy!

  3. #3
    Senior Member
    Join Date
    Jan 1970
    Location
    Stoke-on-Trent
    Posts
    3,883
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default RE: compressor

    OMG - u didnt go and get a prformance power product.

    DONT LOOSE YOUR RECEIPT

    hahaha

  4. #4
    Doddy
    Guest

    Default RE: compressor

    Try machine mart they are well cheap, you need to get a compressor with a large tank volume, the bigger the better, and a high cfm, some wear around 10 would be nice. Also buy a good spray gun, money spent on this is, money well spent.

    before now i`ve used small volume compressor and its hard work as the pressure does not stay constant. So you realy need large volume, or link it to a number of gas cylinders, so storing a volume of air before spraying

  5. #5
    Club Member ade's Avatar
    Join Date
    Mar 2002
    Location
    Glasgow Wears:A Skirt
    Posts
    10,822
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default RE: compressor

    mines been fine so far - good coverage and decent fan off gun.

    I'd rather have a bottle in front of me than a frontal labotamy!

  6. #6
    Senior Member
    Join Date
    Oct 2001
    Location
    Great Yarmouth
    Posts
    839
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default RE: compressor

    I have found a compressor - 7.5-9cfm piston displacements, max-118psi, 2HP 50 litre.
    what do you think?

    IF IT'S STANDARD, CHANGE IT!

  7. #7
    Small Block Club Member CP's Avatar
    Join Date
    Nov 1999
    Location
    Bedford.Drives: Cat Challenger 75D
    Posts
    2,808
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default RE: compressor

    I think you are putting the cart b4 the horse. What you need to do is ask at a spray shop/commercial paint wholesaler what you need. The compressor might be cheap enough but getting set up to do a good job will be expensive. You'll need a lot of stuff and its expensive are the materials. If you are going to use 2 pack watchout cos it is extremely poisonous.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •