rear builds
will a set of 6x9s sound good in the rear quarters of my sr . i want em here and not on the shelf if i make mdf pods and mould with filler will they be solid enuff to make them perform their best .i have alpine components in the doors and a single 1000w 12in alpine sub in the boot powered by a v12 amp. i would also need to sound deaden the rear quarter aswell, right thanx
RE: rear builds
ive heard that they can sound good. but you need to get 6x9's that have smallish magnets otherwise they will foul the arches and bodywork.
have a play, i mean ive seen an article a couple of years ago that puts a 10" sub in the passenger side one!!
BEng Hons Automotive Electronics Engineeringworship my electronics skills :D
RE: rear builds
don't use filler, use fibreglass. :D
RE: rear builds
I`ve made a pair of mdf rear 1/4 trims out of 12mm mdf and mounted the 6x9`s in them, sounds the bollox but it`s a pain to get right. You`ll have to cut a bit of the inner arch off on the drivers side and make sure you don`t snag the seat belt.
RE: rear builds
i made mine and didn't have to cut anything out the arch (am using the new pioneer stuff) which has quite small magnets
Posting Permissions
Reply With Quote