Results 1 to 9 of 9

Thread: 2ltr 8v turbo

  1. #1
    Newbie
    Join Date
    Nov 2004
    Posts
    27
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default 2ltr 8v turbo

    got a 20SEH in my nova and fancy doin a turbo conversion. ive already got a manifold, actuator T3 etc from an RST. Can this manifold b used? also i thought the standard ECU could used with a fifth injector and a little help from courtenay, any ideas?? :idea:

  2. #2
    Senior Member
    Join Date
    Jul 2002
    Posts
    541
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    allnova look through the old threads that concern turbos theres all the info you need there as it's gettin very tiresome repostin the same information day in day out

    chris

  3. #3
    Senior Member
    Join Date
    Dec 2003
    Location
    Wherever there's a fool to pity - and Berkshire, Reading area
    Posts
    362
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default turbo

    That's not very nice! Maybe you or somebody should do a sticky turbo conversion How To.

    And that stupid Search form doesn't work and, as far as I know, never has.

  4. #4
    Senior User
    Join Date
    Mar 2003
    Location
    HMP Dartmoor Hobbies: Running up walls Dislikes: Bling
    Posts
    2,886
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    search never has worked, i don't know why they don't just take it off or get it fixed.

  5. #5
    Junior Member
    Join Date
    Nov 2004
    Location
    hartlepool, north east
    Posts
    22
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    the manifold will not fit i dont think, but for starters you would have to lower the compression ratio (unless you where only going to run low boost) you can either put a thicker head gasket on or use c20 let pistons, then you would need an intercooler system and some extra fuel when it come on boost. you could use the mf2 ecu to run a fifth injector (wallace performance supply this kit for about 400 quid) but all in all you are looking at 2 grands worth of gear to get exactly the same power as you would from a c20 let.

    id just put an let in it, its loads easier and can easily get to 330 brake

  6. #6
    Senior Member
    Join Date
    Jul 2002
    Posts
    541
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    ok have decided maybe i was a bit blunt,

    heres the link to the last big thread i did on turboing an engines,

    http://www.novaload.net/forums/viewt...00705&start=15

    its about turboing a 1.6 8v engine but covers all the main principles of turboing an engine and these just need adapting to suit the engine, main thing that springs to mind are turbo size and cooling but these are easily overcome other than that i think its just the same as the thread says

    chris

  7. #7
    Senior Member
    Join Date
    Dec 2003
    Location
    Wherever there's a fool to pity - and Berkshire, Reading area
    Posts
    362
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default turbo

    Think that pretty much says it all really! Surely that should be made sticky for everyone to see?

  8. #8
    Senior Member
    Join Date
    Jul 2002
    Posts
    541
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    yeh i know it covers most stuff and when this post went up originally the linked post was only 3 posts down the page hence i couldnt be bothered explaining it all again

    id quite like to see the post made sticky aswell but only once the few issues in it are correcte/answered

    chris

  9. #9
    chippy shoulder Admin
    Join Date
    Nov 1999
    Location
    Crowland, The Dirty North
    Posts
    35,414
    Post Thanks / Like
    Mentioned
    18 Post(s)
    Tagged
    0 Thread(s)

    Default

    added to the faq list, stop bitching among yourselves and ask for things to be stickied etc if they are useful etc.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •