New Install-Help Needed
Right,
I have:
amp 400-sum michael schumacer one
sub 400- macaudio
speakers 250 -macaudio 6x9s
some 5 or 6in(cnt memba size) component(2)
crossovers(2)
tweeters(2)
Headunit isSony mp3 one wiv the drive s newish out...
if anyone has a basic guide id appreciate it alot as im completely useless at this stuff,
I like nice clear tunes and i most play dnb,im not 2 bovered bout loudness jus good quality
Cheers
errrr you dont say what you want exactly mate, explain what you want help wiv abit better.
...
how 2 rig it up..
so you just bought it all without really having a clue what you were buyin??
anyway heres how it goes...
you connect the sub to the amp and the amp to the head unit, im sure you'll b able to bridge your amp for more power as most can be these days.
6x9's straight off the rear outputs on the head unit
as for the front you connect the crossover to the head unit (the two front channels) and the components and tweeters to them
if you can get more info on the amp that would help and if you could get another amp for the crossovers that would also help.
did you get a power cable kit?
you need a power supply from the battery for your amp.
Light travels faster than sound. This is why some people appear bright
until you hear them speak.
"EVERY LITTLE HELPS"
:wink:Originally Posted by srs1
.
its a 4 channel amp if that helps,i fink i now how to righ the amp,sub and 6x9s up i got the amp wiring kit and seems all simple,only fing im bit unsure about is running from the headunit,and settin the crossover up with the tweeeters and components,what shud i wire the components 2 on the crossover and the tweeters?its says mid and stuff like that on the crossover,
cheers for your help mate.
think the mid is the bigger or component speaker, n the tweeter is summin lyk high level. but dnt quote me on dat.
ya wire components to mid and it will say head unit or amp as well thats obviously where ya head unit goes on tweeters to the high or tweeter port. do you mean your unsure how to wire the head unit up.
..
right this is what i was finking of doing,let me no if this all sounds ok or whether itll fuck me motor/ice up etc:
On the amp bridge the sub and run 6x9s aswell
Run the crossovers off headunit as u say and then the components nd tweeter from that.Do i run speaker cable from say the front left and front right of headunit for the crossover,then the components/tweeters off that so it works as a sort of amp?
How can i find out about which wires on plug r front right front left etc etc.
Cheers wiv ur help i aint gota clue wen it cums 2 this sorta stuff.Wana get it all rigged up got me test on the 14th. :o
Posting Permissions
Reply With Quote