Anyone got any tips or advice when putting a 1.4se in a nova
Anyone got any tips or advice when putting a 1.4se a nova
Anyone got any tips or advice when putting a 1.4se in a nova
Last edited by stockcar123; 02-12-15 at 12:57 PM.
make sure you remember to tighten the bolts.
Hahah very funny
Think is pretty straight forward just not sure if like you have to change fuel pump or anything major I don't think you need to
Need to know what you're starting with before being able to give advice on those things.
I've got a 1.2i merit + single point injection was hoping to put a 1.4se in with the multi point injection on it
Good stuff. So once you've swapped out the engine fit the 1.4 mpi engine loom and splice it into the spi wiring. There's plenty of it on an spi so should find the right colours!
It'll be an in tank pump so get an mpi pump from a mk3 astra.
What do you mean splice in to it and will need the change the Ecu won't I
Splice means join the new engine loom to the existing 1.2 loom. The 1.2 ecu is discardedOriginally Posted by stockcar123
Does the engine loom plug into the the 1.2 loom then using the connectors
Posting Permissions
Reply With Quote