My white c20xe project

[Scottcooper85]

Excellent job mate.
You ballsed that fence in the garden though eh?

it was an old panel I had and the grass there is really boggy

[Edd]

Looks very nice

Mods on the intercooler are great

[josh-sri]

Looking spot on Scott keep up the good work mate

[Scottcooper85]

Looks very nice

Mods on the intercooler are great

Cheers mate, for a young lad his fabrication work is spot on. Think I'm going to get him to make an inlet plenum soon

Looking spot on Scott keep up the good work mate

Thanks mate

[Scottcooper85]

Bit more done on Sunday, I've been really busy though so struggling to find time to do stuff.

A couple of days before Sunday I managed to get my fuel lines hooked up to the rail and the fpr on too, but didn't have any m4 bolts to mount it so that still needs doing.
had the car running too but only for a very short time as it doesn't have coolant in and is getting 4bar of fuel haha, but I wanted to fire some oil around the engine.



Also got my oil cooler mounted too, I'm going to run it behind the front panel for now due to space issues and see how it goes.



Next it was the boost controller on so it allowed me to fit the radiator and bumper




Radiator went on next. I'm having some issues getting the coolant pipe to fit though. It's hard to size it up by the photos but since moving the radiator over to allow for the intercooler pipe work the top hose exits the radiator close to the light surround and has to make a tight turn back to the thermostat. Also as I'm running a t3 the afm pipe runs right across where it needs to be.

my 2 options at the minute are either get some hoses with different bends and try construct something or buy an alloy radiator and get the pipe moved to face straight back at the stat (which I'll probably do in the long run to make a nicer job)









moved onto the bumper then, which I was struggling to get back with the 9L fmic.....

so so out came the grinder



didnt really want to but, not too fussed either way as I think it looks okay. Needs a bit of straightening.



Also fitted the gauges. Might only be temporary though as I'm not sure I'm happy with how they are.





sold my seats too



started painting some v6 calipers




And got new security



going to try do some more next week as I've been collecting parts and ordered some interior bits.

[Maddukeman]

Got a toy poodle that looks more off putting that big teddy bear , u said manifold was close but think might be abit to close for comfort , think solid mounts & and heat rap needed bud

[Scottcooper85]

Got a toy poodle that looks more off putting that big teddy bear , u said manifold was close but think might be abit to close for comfort , think solid mounts & and heat rap needed bud

The radiator is leaning on it at the minute mate it needs a bracket making to pull it away.

[Benn]

Ic looks good, same mods i made to mine. Sits just in the right place too. Nicely in the mouth of the bumper.

[Scottcooper85]

Bought some things....

Arse only just fits in these



One fearless cage





Had these in the shed a while


Polished rear brace

[Maddukeman]

Cage looks good bud, seats too ,they do look a bit bum tight