Jamacian Yellow XE

[DAFTJOHN]

Can you fit the nova in the garage on its side attached to the jig?

It won't fit in sideways but I've a door motor bolted to the roof the looses over a foot.
It fits fine when turned 180.

[DAFTJOHN]

When you spin it over John how close is the roof to the Deck and how easily does it spin?
Thinking about getting one of thee Jigs as it looks much easier to get a proper job done on the underside.

It spins with one finger, there's about 4 inch from roof too floor. My garage is on a slope and it went over the lip fine.

[DaftJohns_Mate]

Piece of piss once you get the right hole!

[NOV4_SPORT]

Looking good John mate, was good catching up with you the other day and will pop over at the weekend for a little look at the shell

Iain

[scott.parker]

It won't fit in sideways but I've a door motor bolted to the roof the looses over a foot.
It fits fine when turned 180.

So if you had a standard door no motor you think it would be alight?
As I do want to buy one then find I can use it on its side in a standard garage

[DAFTJOHN]

So if you had a standard door no motor you think it would be alight?
As I do want to buy one then find I can use it on its side in a standard garage

What's the internal height of your garage and ill see if it will fit.

[sport]

John did the new painter guy come and look at the shell?

[DAFTJOHN]

Right o, the cars ready to have some welding. Ideally I think it needs a front panel and I'm not happy with the bottom of the sills. There is a little rot around the drivers rear inner wing and the hole where the overflow pipe goes.




Behind the tank and chassis legs are sound

[DAFTJOHN]

John did the new painter guy come and look at the shell?

He did mate, he's quoted me to build the door, tailgate up, polish, vinyl on and windows in. Good quote. The more I'm going around the car the more little bits I notice so while its like this it'll be getting sorted. Prob have the lower half repainted.

[sport]

Good good mate shame the bits werent caught earlier on.