xe conversion alternator belt

[dougie_boi]

evening all
does anybody have size and part numbers for the belt needed its got the v-belt pulleys tried a 1.2 one but it was a fair bit short tried tieng string round them and took the into the local motor factors but they dont want to know unless i have a make and model its for

[Adam]

Go in Halfords with your 1.2 belt and just get a longer one. Cant remember what mine was off, think it may have been a 1980s VW or something like that.

[mowgli]

try a local Bearing/engineering supplies place (yellow pages). they will have loads of off the shelf vee belts to measure up with.

[auzzy-b]

Would it not just be an early type xe belt? are you running original pulleys?

[MARTIN KELSON]

It should just be a bog standard XE alternator belt.

Just go to Halfrauds & look on their list for Astra / Calibra 2.0 16v.

The bottom pulley aint moved & unless you have modified the alternator brackets etc the alternator is in the origonal place Vauxhall intended it to be, then a std XE belt is what your after.

Martin

[blue_peg_16v]

ask for an astra gte 16v 88 belt

[dougie_boi]

its a late type coil pack engine ive fitted an early xe v-belt bottom pulley as mine was multiy ribbed plus its the later type alternator as well i just swapped the pulleys on it as it was the ribbed type as well

[blue_peg_16v]

the belt in my previous post is what you need to ask for mate you have same set up as my let and thats all i ever ask for when i need one

[dougie_boi]

the belt in my previous post is what you need to ask for mate you have same set up as my let and thats all i ever ask for when i need one

ok thanks matey

[dougie_boi]

rep to all