i know you can get them for the conversion shafts, but what about normal shafts
also how do you do the rears ?
i know you can get them for the conversion shafts, but what about normal shafts
also how do you do the rears ?
big drill & tap & die set??Originally Posted by General Baxter
what 5 stud wheels have you seen gb?
vauxhall onesOriginally Posted by John H
Cav v6 rear disc setup..
the rear is easy to do. the front not so
run an f20 box then ya can use big block shafts thats what phils mate does with his 1.4 16v rally car not sure how ya get the box to fit though
told you saloons are the future!!!!!!!
Get a Tran x lsd with the f20 (larger) side gears. Then use conversion shafts with 5 stud hubs. Not cheap though.
http://www.migweb.co.uk/forums/engin...ml#post3986906
mention's something about veccy cv's - but not said they'd acctually done it
On a n/a smallblock I'd be tempted to cut & shut the shafts together, use smallblock inner & bigblock Cav/Astra outer half with the 5 stud hubs.
As said above, Cav V6 gear on the rear. Or drill & tap the drums.