Benn's on going build

[Jay]

Looks good Ben, will be purchasing some of that degreaser

[Benn]

Rich, Yes it spins freely and no it isnt move in and out.
Ment to have been rebuilt all ready, the blue kkk plates been re-riveted on,
the seals look quite new, only having a instand looking gasket on the outer edge.

Looks good Ben, will be purchasing some of that degreaser

At £4.80 its worth it.

[Adam]

Good work.
Its so much better working on a clean engine!!!
Saves you getting covered in oil and grease as soon as you lay a hand on it

[Benn]

Yeah its much nicer. Need to degrease and wash the garage floor tho..

[dan16v]

Looks good Benn! you going to degrease the head aswell? also you not going to remove the head/ new gasket, belt kit, water pump and oil pump for peace of mind?

[Benn]

Head has been, i'll paint it as its well grown in dirt.
The cam belt and rollers and water pump are all new, i'm fitting a new belt tho. head gasket looks new too, as is the rocker cover..

Am thinking of taking the oil pump off, checking it and changing the gasket behind it.

[Paul]

That turbo looks fine from what I can see from that video Ben.

Come on, get it in, I was enjoying reading that!

[Benn]

Be a while before its in.

[Dar]

Must have been a day for painting core plugs I also did mine, but in normal silver. That degreaser looks like very good stuff.

[Ernie]

Must have been a day for painting core plugs I also did mine, but in normal silver. That degreaser looks like very good stuff.

Far to much time .com