Central locking and Electric window wiring
Does anyone have a diagram for wiring this lot in? I've got electric window motors and switches ( with loom ) and central locking motors ( without loom ) on the way. They are from a GSi going into what was a mk2 merit. They currently have manual doors locks and windows.
i'm sure all GSI's have a combined eletric window and central locking loom, unless somebodies split them
The loom for both should be one piece, there's an earth connection to make on the centre tunnel, then a red (perm live) and a black (ign live) that just plug in to the right-hand-side of the fuse box.
you will probably have to drill the 'A' pillars and doors to get the wiring in aswell.
No need to drill the A Pillars or doors. The holes are already drilled but covered by a plate, just remove that with a small chisel and your away.
The leccy windows should be easy. Its just a case of getting a switched pos and neg to the switches and feeding the loom in. As for the central locking, i'm sure there was a control relay/module that was connected to the gte/gsi's locking, but i can't remember what it does. I've just ripped the cental locking and loom out of my nov, so i'll have a look for the relay. If i find it, you can have it.
Bouch
Excellent, thanks buddy!
Sorry chap, it looks like it's been binned. But theres plenty of gte's getting scrapped, so i'm sure you'll find one.
They are normally mounted above the parcel shelf above the near side foot well.
Bouch
Posting Permissions
Reply With Quote