Yea mate plenty of room this has been my plan throught the whole build so i tryed to keed that area pritty empty for this to go in . Need to move rad fan to the front but apart from that it fits nice n snug
Yea mate plenty of room this has been my plan throught the whole build so i tryed to keed that area pritty empty for this to go in . Need to move rad fan to the front but apart from that it fits nice n snug
All runners fully welded now so time to build back up again
Sent from my CLT-L29 using Tapatalk
Turbo flange to weld on and spout for 44mm v band wastegate .
And its all fabed up . Iv been scratching my head for weeks wondering how im going to weld around the merge . When infact the hardest part of the job was welding the head flange on . That was a b@5tard to get in at between the runners
Sent from my CLT-L29 using Tapatalk
Ooohh welding porn, looks very well done.
Cheers pal . I cant wait to mount the turbo and see it on the car
Is that an steel manifold? I think you want to support the manifold/turbo with all that weight..
The turbo above the gearbox will look mental!
Yea they all have a support from the rocker cover and then underneath from the gear box mount or like in going for from the bell housing bolts
Somthing along them lines
Sent from my CLT-L29 using Tapatalk
Well its back at the dyno and all running on new ms3x ecu all sensors calibrated and idling spot on so time to start tuning . Get it all working on the old manifold then swap it over onto new one once its finished
Sent from my CLT-L29 using Tapatalk