Results 1 to 10 of 10

Thread: Anyone with EPC access?

  1. #1
    Gold Club Member# 001 Club Member Nova_Tek's Avatar
    Join Date
    Jul 2002
    Location
    Hertfordshire..... Builds: ......... Snowplough'd LET
    Posts
    8,107
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Anyone with EPC access?

    Hi all,

    I was hoping someone on here will have access to EPC as I need some definitive identification of part numbers for some cam shafts I have. Tried the online Opel/Vaux catalogues but none identify them. Only been able to get some info from various forum posts, but some info is speculative.

    I have the following:

    90 423 010 (00 388 59 192) - assume this to be LET standard cam (inlet)
    90 423 011 - as above (exhaust)
    90 322 027 (00 38859 022) - unsure if it is XE or LET (inlet)
    2091358 - I have two of these which are stamped the same but one is long and one is short (dizzy exhaust and inlet) I believe these are XE cams.


  2. #2
    Supernova Club Member millworm's Avatar
    Join Date
    Sep 2012
    Location
    Sutton, Surrey
    Posts
    3,752
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    I can check tomorrow

  3. #3
    Gold Club Member# 001 Club Member Nova_Tek's Avatar
    Join Date
    Jul 2002
    Location
    Hertfordshire..... Builds: ......... Snowplough'd LET
    Posts
    8,107
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Cheers bud

  4. #4
    Gold Club Member# 001 Club Member Nova_Tek's Avatar
    Join Date
    Jul 2002
    Location
    Hertfordshire..... Builds: ......... Snowplough'd LET
    Posts
    8,107
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Any news on this Millworm?

    In the meantime I received my digital caliper and thought I'd see what the physical differences were hopefully double making sure what they are.

    90 423 010 (00 388 59 192) - assume this to be LET standard cam (inlet) - 42.5mm(L) x 34.1(w) +/- .1mm
    90 423 011 - as above (exhaust) - 42.4(L) x 34mm(w)
    90 322 027 (00 38859 022) - unsure if it is XE or LET (inlet) - 43.5(L) x 34mm(w)
    2091358 469 (exhaust) - 43.3(L) +/- .1mm x 34mm(w)
    2091358 489 (inlet) - 43.4mm(L) x 34.1mm(w)
    2091358 072 (exhaust) - 43.5mm(L) +/- .1mm x 34.1mm(w)

  5. #5
    Supernova Club Member millworm's Avatar
    Join Date
    Sep 2012
    Location
    Sutton, Surrey
    Posts
    3,752
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Sorry mate on leave till wed so will get on then for you mate

  6. #6
    Gold Club Member# 001 Club Member Nova_Tek's Avatar
    Join Date
    Jul 2002
    Location
    Hertfordshire..... Builds: ......... Snowplough'd LET
    Posts
    8,107
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default


  7. #7
    Supernova Club Member millworm's Avatar
    Join Date
    Sep 2012
    Location
    Sutton, Surrey
    Posts
    3,752
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Not getting anything back on those numbers mate, this is what i could find

    Sent from my SM-G973F using Tapatalk

  8. #8
    Gold Club Member# 001 Club Member Nova_Tek's Avatar
    Join Date
    Jul 2002
    Location
    Hertfordshire..... Builds: ......... Snowplough'd LET
    Posts
    8,107
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Hi Millworm, appreciate you taking the time to check.

    I'm very surprised as to why these part numbers show no results, they obviously exist.

    I'm not much closer to an proper answer, but thanks again.

    Off to raid the web for info... again.

  9. #9
    Supernova Club Member millworm's Avatar
    Join Date
    Sep 2012
    Location
    Sutton, Surrey
    Posts
    3,752
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    Tried them all, some were similar but none the same, and no evidence of them being revised numbers either i'm not a partsman so may be missing somthing but thats about all i can do

  10. #10
    Gold Club Member# 001 Club Member Nova_Tek's Avatar
    Join Date
    Jul 2002
    Location
    Hertfordshire..... Builds: ......... Snowplough'd LET
    Posts
    8,107
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default

    No worries

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •